2.4 TDDi injector seals

[rotory]

Hi all,
I have removed the injectors and sent them away for testing. But I am struggling to locate the copper/steel seals in the recess. I have tried using mirror and torch, tried having a poke about with dental tools etc but damn if I can see any seals in the injector hole.
So does a 2004, 2.4 TDDi 125 Bhp RWD have seals on the injectors ?. This post is confusing viewtopic.php?f=5&t=170570

Regards
Martin

[Spacecat23]

Yes they do. They'll be the same colour as the head maybe that's why you can't see them?

[bambi mk 1]

They usually come out with the injectors .

[Spacecat23]

Is it possible that someone has been in there before and not refitted them?

[ned]

They usually come out with the injectors .

+1 they usually come out stuck to the injectors. N

[rotory]

Thank you all for your replies,
I have looked very carefully at the injectors and what looks like steel washers on the end seem to be part of the nut on the end. I was expecting a separate washer or are they part of the nut.
Thank you
Martin

[ned]

Those steel washer are separate from the injectors but do get stuck on with oil/carbon and are fairly robust unlike the mk7 copper washers. N

[rotory]

Thank you Ned .