*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


MK7 2.4 Cuts out at junction.

Transit Mk6 & Mk7 Forum. All Transits 2000 - 2013

Re: MK7 2.4 Cuts out at junction.

Postby ned » Mon Jun 18, 2018 7:04 pm

Dirty dog had this issue with his mk7 I think he had a wiring fault, think its in his project/progress thread. N

viewtopic.php?f=27&t=172632&start=15#p1540899

.
RUST IS LIGHTER THEN CARBON FIBRE

57 transit 85t260 2.2 swb, moondust silver.
viewtopic.php?f=27&t=209987

03 transit 125t280 2.0 tdci swb 229,000 miles.
viewtopic.php?f=27&t=168296
User avatar
ned
Transit Extremist
Transit Extremist
 
Posts: 21338
Joined: Sat Jan 16, 2016 9:01 am
Location: Somewhere in time

Re: MK7 2.4 Cuts out at junction.

Postby v8dave » Mon Jun 18, 2018 7:26 pm

If the pump learn works but you can't get it to complete the injector learn then from my experience the next step is a leak off test of the injectors.
mk7 08reg 2.4 T350 LWB MHR RWD
mk6 X reg 2.4 T350 LWB MHR RWD - scrapped
mk4 J reg 2.5 L300 LWB MHR RWD - sold on

Notice a trend there ? not too big and not too small
User avatar
v8dave
Transit Fanatic
Transit Fanatic
 
Posts: 3417
Joined: Sun Jan 24, 2010 10:23 pm
Location: Home counties

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Fri Jun 22, 2018 8:07 pm

SCV replaced, only really tricky part was the one 10mm bolt below the inlet manifold "Inlet".

Did not have my laptop with me to do the learn, but she fired straight up and for the few moments she was running was stable.

Will do the learn and report back after a few miles...

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Re: MK7 2.4 Cuts out at junction.

Postby daraioj » Fri Jun 22, 2018 9:30 pm

twin--turbo wrote:SCV replaced, only really tricky part was the one 10mm bolt below the inlet manifold "Inlet".

Did not have my laptop with me to do the learn, but she fired straight up and for the few moments she was running was stable.

Will do the learn and report back after a few miles...

TT
Did you replace it without removing the manifold?

I guess you saved yourself an awful sight :)
2010 2.4L RWD 100ps MT75 LWB High Roof
daraioj
Transit Aficionado
Transit Aficionado
 
Posts: 221
Joined: Mon Oct 03, 2016 11:35 am

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Fri Jun 22, 2018 9:42 pm

no the manifold has to come off unless you're triple jointed and lying on the windscreen with the bonnet off..

Did not even look at the manifold in any detail.

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Fri Jun 22, 2018 9:44 pm

want it at least running right and MOT'd by the end of the month as I want to take my Jaguar off the road for a month to sort a load of little items out without having to rush.

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Sat Jun 23, 2018 1:54 pm

Pump learn done this morning, took longer than I imagined , partly as I had to leave it running for 10-15mins to get up to 55C!

Anyway it's done the pump learn without any problems and whilst it was warming up the idle was solid.

Traveld 4 miles without it cutting out at a junction but only time will tell, it's on a 90 mile run tomorrow with 4-5 stops so will see how we fare..

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Re: MK7 2.4 Cuts out at junction.

Postby dirtydog » Sat Jun 23, 2018 2:12 pm

ned wrote:Dirty dog had this issue with his mk7 I think he had a wiring fault, think its in his project/progress thread. N

viewtopic.php?f=27&t=172632&start=15#p1540899

.



Yeah mine was a chafed wiring loom next to the abs pump
2006 Mk7 115 350 lwb, med high top
2006 Mk7 110 350 lwb, high top camper
User avatar
dirtydog
Transit Extremist
Transit Extremist
 
Posts: 5675
Joined: Wed Feb 17, 2010 5:56 pm
Location: Haslemere, Surrey

Re: MK7 2.4 Cuts out at junction.

Postby daraioj » Sat Jun 23, 2018 3:25 pm

dirtydog wrote:
ned wrote:Dirty dog had this issue with his mk7 I think he had a wiring fault, think its in his project/progress thread. N

viewtopic.php?f=27&t=172632&start=15#p1540899

.



Yeah mine was a chafed wiring loom next to the abs pump
Sorry to hijack the thread but how did you clean your inlet manifold? Did you clean the ports too? Thanks in advance
2010 2.4L RWD 100ps MT75 LWB High Roof
daraioj
Transit Aficionado
Transit Aficionado
 
Posts: 221
Joined: Mon Oct 03, 2016 11:35 am

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Sat Jun 23, 2018 4:45 pm

I did not bother cleaning mine, i can't see it helping that much anyway.

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Re: MK7 2.4 Cuts out at junction.

Postby daraioj » Sat Jun 23, 2018 9:03 pm

twin--turbo wrote:I did not bother cleaning mine, i can't see it helping that much anyway.

TT
Mine is not as bad as I thought it'd be but still the first two or three ports have a good 3mm wall of crap. I don't know how big a difference it would make but I wouldn't mind cleaning as much as I can off it while I'm at it.
2010 2.4L RWD 100ps MT75 LWB High Roof
daraioj
Transit Aficionado
Transit Aficionado
 
Posts: 221
Joined: Mon Oct 03, 2016 11:35 am

Re: MK7 2.4 Cuts out at junction.

Postby twin--turbo » Sun Jun 24, 2018 12:24 pm

80 miles done including driving back through town and not cut out :)

Think, fingers crossed it was nice and simple ;)

TT
twin--turbo
Transit Aficionado
Transit Aficionado
 
Posts: 471
Joined: Sun Jun 10, 2018 3:04 pm

Previous

Return to Mk6 & Mk7 - Third Generation Transits



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.