Vin and type incorrect

[greet]

When I enter my VIN code WF0LXXGBFLYE..... I get info on a Fiesta, while it is a Transit. After the VIN I read "(01)"; what is that. Somebody can help? Is this a (MK5 or) MK6? what serie?

[richgold]

Does the vin plate on the van match the number on the chassis and the one in your log book?

[dumper]

I had problems on my 6 it turned out to be the O was lower case WFo

[v8dave]

The chassis number breaks down as follows

WF0 - world manufacturer designator, in this case Ford AG
L - model variant, in this case a rwd van
XX - unused constant, it will always be XX
G - production source, in this case ford germany
B - factory, this time Genk
F - model, a transit
L - model variant repeated
Y - year of manufacture, this is 2000
E - month of manufacture, August
5 numerals, because no one expect to make more than 99999 vehicles a month

I think Etis is confused.

Edit: forgot to add this confirms you have a mk6, if you had a mk5 the model code is V

Edit 2: Etis is confused !!
2000 model fiesta data says model code for fiesta is J
mk5 transit data says model code for transit is V and fiesta is L
mk6 transit data says model code for transit is L, no mention of Fiesta

[ned]

Post a picture of your van and someone will say if its mk5 or 6. N

Forget that

[greet]

Post a picture of your van

Here it is.
And.. After the VIN I read "(01)"; what's that?

[greet]

Does the vin plate on the van match the number on the chassis and the one in your log book?

On chassis yes; dont have logbook. Regards

[v8dave]

mk6.

Vin should be in 3 places (may be more I don't know of)
One visible through windscreen.
Label on door pillar, uk spec rhd have it on passenger door pillar.
in one front wheel arch on panel above chassis leg.

The mk5 has the vin plate on the step rather than the door pillar.

the pillar/step vim plate carries lots of additional info about vehicle mass, carriage weights, emissions specs, engine spec, paint colour, interior trim.
Nothing I have explains the "(01)".

[greet]

Thanks a lot to all who replied. I think I have the right info know! Regards !