Mileage display after tachograph removal

[The egg]

Hi, I have a mk6 2.4 transit, it had a factory fitted tachograph that stopped working so I removed it. However the mileage was displayed on the tacho until it broke and not on the dash so I have now lost this. Can anyone advise what part or repair I need to have my mileage displayed on the dash as it would generally be? Thanks

[roperman]

You'll need someone with IDS or similar kit to do module programming to program the BCM.

Where abouts are you?

Danny

[The egg]

Hi. I've read on here on a tachograph removal post that the mk7 transit needs that doing but that the mk6 transit doesn't, it needs a jumper loom replacing, is that correct? Thank you

[APH]

Hi. I've read on here on a tachograph removal post that the mk7 transit needs that doing but that the mk6 transit doesn't, it needs a jumper loom replacing, is that correct? Thank you

That's correct, there's a jumper plug in a grey connector near the passenger fuse box. if you dont have the plug you can join the correct two pairs of wires together and it will work OK.

Andy

[The egg]

Thank you for replying. do you have any idea which 2 wires need to be joined to get it working on the cluster please?

[Mad Husky]

Did you get the info you needed if not i just looked at my mk6 the only grey block there has two wires in it but only 1 pair make a connection blue and yellow jumpered together the other was white/purple and went nowhere.