mk7 transit tourneo minibus error codes

[orlandyham]

A while ago I had to have gearbox rebuilt as 5th gear wasn't working. Couple of days after that fault code P2033 came up, figured it was to do with the gearbox having been out and back in. Today, driving home form town, engine malfunction light and message came on and went into limp mode. Got home, turned off engine, waited, turned back on, no engine malfunction light. Put OBD2 on it and codes P2463 and P246C came up along with the original P2033.. From what I can see this is to do with the DPF. I'm reading lots of things about regen etc, and am confused. Doesn't the regen happen where the engine has AdBlue? As I didn't think my transit did have it.... Anyone shed any light on this for me ???

[knobby1]

What year model is it..?

What code reader was used..??

Lord Knobrot

[orlandyham]

What year model is it..?

What code reader was used..??

Lord Knobrot

It's a 2012 Transit Tourneo Trend - 2.2 TDi

The code reader was an OBD 2

[knobby1]

It's a 2012 Transit Tourneo Trend - 2.2 TDi

The code reader was an OBD 2

I assume it's a Euro-5..?? All code readers for Mk7's are OBD2....we need to know what make/type it is....not all of them can read codes properly.

Lord Knobrot

[orlandyham]

@knobby1 Ah I get you now !! It's a Konnwei OBDII/EOBD - model no is KW808.
It had originally thrown up code P2033, and we fixed that wiring problem yesterday, so that code is not coming up now. Tried the 15mins at 2000rpm regen but once I turned her back on it threw up P2463 again....