*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Engine swap

Transit Mk6 & Mk7 Forum. All Transits 2000 - 2013

Engine swap

Postby Chris 6169 » Sat Aug 18, 2018 11:54 pm

2004transit 2.4 swapped engine starts and cuts out after 5seconds engine came out of 2004transit125 350my
Truck is 115 2004with digital clocks the doner van as analogue clocks swapped ecu and transponder but only runs for 5 seconds and cuts out any help please
Chris 6169
Newbie
 
Posts: 4
Joined: Sat Aug 18, 2018 11:39 pm

Re: Engine swap

Postby dumper » Sun Aug 19, 2018 8:08 am

Theirs two sensors on the flywheel or front of the engine that if you get the plugs on the wrong way round check them first van will do this I’ve read on hear
MK 8 L4 H3 Motorsport campervan
Past camper vans
1974 mk1 v4 with 2.0 pinto fitted
1986 mk3 2.5 di swb
1990 190 lwb 2.5 di
1998 100 lwb 2.5 di
2006 350 jumbo 135 tdci
dumper
Transit Extremist
Transit Extremist
 
Posts: 5438
Joined: Sun Jan 20, 2008 2:56 pm
Location: Lincolnshire

Re: Engine swap

Postby Chris 6169 » Tue Aug 21, 2018 9:25 am

Do the numbers on the pump have to match as it won't code to my ecu
Chris 6169
Newbie
 
Posts: 4
Joined: Sat Aug 18, 2018 11:39 pm

Re: Engine swap

Postby Altransit » Tue Aug 21, 2018 10:52 am

Chris 6169 wrote:Do the numbers on the pump have to match as it won't code to my ecu

If it's not coded correctly, it won't fire up at all, as the immobiliser will prevent it.

Firing and cutting out sounds like the crank sensor, so I would look at the two plugs at the back of the engine, as advised above :idea:
1994 Mk4 SWB 115 Minibus 70ps Di (R.I.P.)
1997 Mk5 SWB 115 Minibus 70ps Di (Gone, but not forgotten!)
2004 Mk6 SWB T280 Medium Roof 85PS 2.0 TDDi - Vantunered (Also gone)
2008 Mk7 SWB T280 Medium Roof 85PS 2.2 TDCi - Also Vantunered
User avatar
Altransit
Site Moderator
 
Posts: 40196
Joined: Tue Oct 17, 2006 12:23 am
Location: Bicester, Oxfordshire, UK

Re: Engine swap

Postby Chris 6169 » Tue Aug 21, 2018 5:50 pm

Number on old pump ends in 4040new pump ends with 5040
Chris 6169
Newbie
 
Posts: 4
Joined: Sat Aug 18, 2018 11:39 pm

ECU PROBLEMS

Postby Chris 6169 » Fri Aug 24, 2018 4:28 pm

Put pump on and the ecu won't code with pump some one as tryed to code and as coded my key to another ecu so my ecu will not work key
Chris 6169
Newbie
 
Posts: 4
Joined: Sat Aug 18, 2018 11:39 pm


Return to Mk6 & Mk7 - Third Generation Transits



Who is online

Users browsing this forum: kajetan

This site contains affiliate links for which we may be compensated.