Recall 350 rwd Mk6

[MR JUMBO]

can you please check mine for any recall please as i have only just bought the van a month ago so wont be getting any recall letters
WF0LXXTTFL4Y49623

[coconut]

can you please check mine for any recall please as i have only just bought the van a month ago so wont be getting any recall letters
WF0LXXTTFL4Y49623

Yours has the axle shaft recall as well
Same again, just get it booked in

[MR JUMBO]

cheers fella will ring up tue

[BigNeil]

hello here is another one for the magic treatment ?

wf0lxxgbfl3l81603

thanks in advance

[coconut]

hello here is another one for the magic treatment ?

wf0lxxgbfl3l81603

thanks in advance

Ooh, a 125ps on a 5.13 axle, flying machine

No outstanding recall on yours

[BigNeil]

hello here is another one for the magic treatment ?

wf0lxxgbfl3l81603

thanks in advance

Ooh, a 125ps on a 5.13 axle, flying machine

No outstanding recall on yours

ty. it does fly

better than the old longcube

[psml1]

thanks for the info.

i checked shaft play today, o/s 1.2mm n/s 1.1mm what should they be and minmax tollrences.

what is involved to make the fault fixed

[coconut]

thanks for the info.

i checked shaft play today, o/s 1.2mm n/s 1.1mm what should they be and minmax tollrences.

what is involved to make the fault fixed

Thats well within spec, maximum is 1.7mm, dont think there is a minimum as long as there's a bit of end float

Just a simple case of fitting the DiSH to yours

[mjs 73]

hiya, do you know if theres any problem with my transit reg mw53kby
thanks

[psml1]

thanks coconut

[vandaft1980]

hi would a 137ps 55 plate need this done reg number K3YRN used to be ST55OER .thanks kieron

[psml1]

i went to my local ford dealer . they said they would sort the axle and it would be done in the day,,,,, very helpful.

[psml1]

sorry forgot to say on last post ford would be paying the bill

what is dish compared to shims ?????

[coconut]

hi would a 137ps 55 plate need this done reg number K3YRN used to be ST55OER .thanks kieron

Nope, its only on the single wheel 'salisbury' axle, yours has a 'DANA' axle

[coconut]

sorry forgot to say on last post ford would be paying the bill

what is dish compared to shims ?????

Yep, Ford pays as its done under warranty

The DiSH is a Differential Shim Holder, if it needs shims it hold them in place but if no shims are needed its for added security so the 'C' washers on the halfshafts dont come out