transit connect 04 tdci 90 , dmf or not

[bigmac2701]

hi there can anyone tell me if transit connects are fitted with dual mass flywheel , my 04 plate tdci 90 has this funny noise when labouring the engine on gear change between 1500-2000 rpm , no noise when idiling , but rattle noise when you switch engine off , but not if you put foot on clutch first ?? be gratefull for any ideas on this please thanks , van runs fine apart from this thanks

[taz666]

iirc all tdci connects before 2006 had dmfs

[karl]

May be clutch bearing on the fork ??

[taz666]

May be clutch bearing on the fork ??

connects don't have a bearing on a fork, its a slave cylinder/ bearing combined and if there is a knocking noise when the engine is turned off then its probably the dmf

[karl]

May be clutch bearing on the fork ??

connects don't have a bearing on a fork, its a slave cylinder/ bearing combined and if there is a knocking noise when the engine is turned off then its probably the dmf

My bad lol

[taz666]

May be clutch bearing on the fork ??

connects don't have a bearing on a fork, its a slave cylinder/ bearing combined and if there is a knocking noise when the engine is turned off then its probably the dmf

My bad lol

no worries

[gt_addict]

Sounds a bit like gearbox thrash. The rattle noise on mine was springs on te clutch friction plate. Change the clutch and should be sorted.

Mines a 90ps tdci 2004 plate and it had a solid flywheel

[taz666]

Sounds a bit like gearbox thrash. The rattle noise on mine was springs on te clutch friction plate. Change the clutch and should be sorted.

Mines a 90ps tdci 2004 plate and it had a solid flywheel

did it, every 90 ive taken boxes out of has always had a dmf

[gt_addict]

Well I ordered a new flywheel from fords on the assumption it was the DMF. I had the part and it was a solid flywheel. I have the ford parts guy at my local dealership my van details so it must have been te right part. Also asked my mate who was changing te clutch and gearbox at his garage and he said it was solid aswell.

It's a very strange thing with these connects and the dmf's. when I looked for a flywheel for a connect on euro car parts it only listed a DMF for the 75ps connect.

[bigmac2701]

hi guys thanks for all your replys , am gonna take box out anyway and see , spoke to a few mech's that i know and they all said all the one's they had done didnt have one , seen also other posts some folk sayin they did n some sayin no , box out n see i think , its been doin it for about 2 yrs & never gotten any worse lol

[paul2012]

the connects 75ps upto 6/2002 were fitted with DMF the rest have SMF fitted

[Harrygm]

I've just bought a t230 90ps 58 plate connect and the engine judders between 1750-2000 revs now I thought dmf but being told it has and it hasn't got one, also feels like I can feel the engine movement threw the clutch when it's on the floor

Sent from my SM-A510F using Tapatalk

[Harrygm]

Judder only happens when I floor it

Sent from my SM-A510F using Tapatalk