Help getting the right part

[steveohim]

I'm trying to get a mesh bulkhead for my transit connect high roof, and having a bit of a nightmare.i thought I got one from eBay after I got the sizes from the sellar but it turned out to be a low roof one, can anyone show me a photo of a high roof mesh bulkhead?

Here is the one I got it doesn't fit

ImageUploadedByTapatalk1418722537.935958.jpg

[gt_addict]

The high roof one is the same as the low roof but just has longer "arms" at the top to take up the difference in height.

[steveohim]

ImageUploadedByTapatalk1418735957.242448.jpg

Looks quite a bit different from what I can see

[gt_addict]

What reg is your van and what reg is the picture of? My 2004 just had longer legs. It's possible they changed the design on the later models.

[steveohim]

My van is 2005 not sure on the picture but I want the mesh to go to the roof

[steveohim]

ImageUploadedByTapatalk1418750507.596079.jpg

Does anyone know what those holes are for at the top of the one I bought?

[gt_addict]

ImageUploadedByTapatalk1418735957.242448.jpg

Looks quite a bit different from what I can see

Looking at the dash that is a almost new if not very new connect. That could we'll explain the different looking cage.

[steveohim]

I'm guessing u might be right

[steveohim]

I've found one but it was taken out of a 07 plate connect, mine is 55.also his is a t230 where as mine is a t220,would it fit?

[gt_addict]

T230 and t220 are irrelevant. That just refers to how much weight it can carry. The 57 plate one should fit.

[steveohim]

Ok thanks