had a slight bump in my 54 plate connect,not going through insurance, but i need to replace the front panel,bonnet catch,grille etc?
can't open bonnet yet but i was wondering if the front panel is bolted on or do i need to weld the replacement on?
have never stripped a connect front end so any advice would be helpful
*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
connect front panel
3 posts
• Page 1 of 1
connect front panel
by ru548 » Fri Apr 29, 2016 8:44 pm
- ru548
- Transit Addict
- Posts: 40
- Joined: Fri Jan 14, 2011 5:31 pm
Re: connect front panel
by paul2012 » Sat Apr 30, 2016 12:36 am
They are bolted into place 
***NOTE*** There are 2 types fo front slam panels available for 2003-2006 Connects.
1. GRP panel with steel reinforcement behind it. (2 piece slam panel)
2. single piece steel slam panel.
***NOTE*** There are 2 types fo front slam panels available for 2003-2006 Connects.
1. GRP panel with steel reinforcement behind it. (2 piece slam panel)
2. single piece steel slam panel.
2007 Ford Mondeo mk4 1.8 TDCI -RETROFIT IN PROGRESS
2009 Jaguar X-Type 2.0D
2010 Vauxhall Insignia- RETROFIT IN PROGRESS
IDS & GM GDS2 services
SUBSCRIBE http://www.youtube.com/@PaulsTechChannel
2009 Jaguar X-Type 2.0D
2010 Vauxhall Insignia- RETROFIT IN PROGRESS
IDS & GM GDS2 services
SUBSCRIBE http://www.youtube.com/@PaulsTechChannel
-
paul2012 - Transit Extremist
- Posts: 7445
- Joined: Sun May 13, 2012 8:59 pm
- Location: Nr Wretton, Norfolk
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users