Hi All
I just purchased my first ever van! A T200 Connect TDI and it only came with one basic key. My Dad also has a Connect and he has one of these key fobs....
https://encrypted-tbn2.gstatic.com/shopping?q=tbn:ANd9GcQ4u3uDOgAtwbBwAsAeTEgMZI4h_2Q0vFyiPQKsOIsSdol1Bqe2dHc60izkV3i72gC5Mg1UoHOO&usqp=CAc
...So I bought one after seeing that programming them is really simple.
I followed the standard instructions of turning the ignition on and off 8 times within 10 seconds until the doors lock however they have never locked for me. The van isnt entering 'program mode'. The very first time I tried this, the Van beeped on the 4th turn but no locking of doors....and no beep since.
I thought a reset of the ECU may help so I disconnected the battery for a while and reconnected. Since then the hazzards now flash for about 25 seconds every time I turn the ignition on and also the same when turned off. I cannot hear a relay ticking though and I still cannot get the van into 'program' mode.
Any Ideas where I am going wrong?
Many thanks