*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Connect 2 oil leaks

Use this section to post all specific Transit Connect topics and questions

Connect 2 oil leaks

Postby johnkent » Sat Dec 09, 2017 8:43 pm

1st one front of the engine as you look in on the right its like a unit with a few heater type sized hoses coming out, seems to be dribbling from the casing of it, what is it and is it involved to change?

2nd one is the small bypass hose at the rear of the engine comes out of the block and joins a pipe from the bottom of the turbo, cant see how to change it as i slid it up and the two pipes nearly join so there's no room to get another one on r put a jubilee clip on it, is there a best way to change this ? cause i cant see how as access is terrible

Lastly a noisy clutch release bearing, does this meant clutch is about to go ?

Any help or advise is appreciated
johnkent
Transit Fan
Transit Fan
 
Posts: 16
Joined: Sat Nov 18, 2017 9:02 pm

Return to Transit Connect



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.