*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


connect fault codes

Use this section to post all specific Transit Connect topics and questions

connect fault codes

Postby gizmo1122 » Mon Oct 11, 2010 1:00 pm

connect 52 reg,1.8 duro,
just scanned it again and faults are
P1246 alternator load input (see P0622) ?.
P1632 smart alt faults sensor circuit malfunction.
P1211 injection control pressure sensor.
P0251 injection pump fuel metering control A.
drive for 5 mins then heater plug light comes on and stays on,not flashing,then van dies not limp mode,can start back up straight away but same problem again after 1 minute,
i have changed fuel filter,
i have already put a brand new alternator on yesterday,what are these faults and how do i fix them,
any help please,
i have had this van for 3mths and not used it has broke down on way home,
i have about 3000 in this van now,so i am ill,i dont want to sell it on so somebody else has the problem i am not like that,but i am pretty determined not to be defeated by this one,
gizmo1122
Transit Addict
Transit Addict
 
Posts: 24
Joined: Thu Jul 22, 2010 8:24 pm

Re: connect fault codes

Postby ddubb1 » Mon Oct 11, 2010 5:12 pm

Hi
I had same fault on mine and it turned out to be the pump, ouch!!
ddubb1
Newbie
 
Posts: 4
Joined: Tue Oct 05, 2010 2:26 pm

Re: connect fault codes

Postby gizmo1122 » Mon Oct 11, 2010 7:17 pm

diesel pump how much cost you,
heater plug light flashes not stay on has said before,
gizmo1122
Transit Addict
Transit Addict
 
Posts: 24
Joined: Thu Jul 22, 2010 8:24 pm


Return to Transit Connect



Who is online

Users browsing this forum: Majestic-12 [Bot]

This site contains affiliate links for which we may be compensated.