Hi all couple of questions from a newbie
Trying to fit the Osram drl/fog on my MK8 Jumbo where would be the easiest place to pick up a live and ignition feed ,had a look in the engine fuse box there is a few unused ones in there switched and constant feed would it be ok to break in there?
On my headlamp units I have a H7 + H1 low beam ,H15 high/DRL and a led ? Strip
If I am using the Osrams for DRLs can I just cut the wires for the DRL part of the H15 filament and finally would there be a way of making the LED strip come on at startup rather than just sidelights i.e. feed with a switched live or even looping in the cut wire from the original DRL or would that back feed and affect the can-bus.Any suggestions would be welcome
Thanks in advance