Transitmania 10 @Santa Pod 18th to 20th May 2018


Fitting fog lights on 13plate

The all new 2013 Transit Custom Forum. Transits and Tourneos 2013+

Fitting fog lights on 13plate

Postby sowden87 » Wed Jan 03, 2018 6:38 pm

Hi

Just was looking into putting fog lights in as I haven't got them in the moment ,I have a 13 plate custom eco

just wondered if the wiring is already in there or if it has to be added ?

Thanks for any info
sowden87
Newbie
 
Posts: 3
Joined: Sun Aug 07, 2016 7:45 pm

Re: Fitting fog lights on 13plate

Postby loot » Fri Jan 05, 2018 5:30 pm

Shouldn't be to hard, the bumper trim parts just pull off i think but you can replace them with ones with fog light holes, there's 2 types though, sport are different to non sport.
The lamps should probably fit on.

Fuse f8 15A does the fog lights through the bcm.

Bcm pin 16 c2280b does both fog lights live then you add a ground to each, 8mm chassis bolt will be close by on either side.
Wire colour from bcm is yellow/orange trace.

You will have to get the foglight switch for the dashboard and probably activate it in configuration to have factory fog.

You could do it externally with a relay and a switch on the dash I guess.
65 290 2.2 125ps custom with 2 side doors yes 2 8)
07 350 170ps lwb mh AKA snowflake sold but not forgotten :-)
Image
M radio codes here
Ids v86 licence + v86.04 update + xprog here
Ids map here
User avatar
loot
Site Moderator
 
Posts: 24191
Joined: Sat May 05, 2012 6:06 pm
Location: North Wales

Re: Fitting fog lights on 13plate

Postby sowden87 » Sat Jan 13, 2018 8:56 am

Thanks , seems a lot of work to do myself plus a separate switch would look odd for them , just thought it would all be in place and just optional for different models lol
sowden87
Newbie
 
Posts: 3
Joined: Sun Aug 07, 2016 7:45 pm


Return to Transit Custom



Who is online

Users browsing this forum: No registered users