What did you do to your Custom today?

[Kent Discos]

Happy to remove the single piccy although can't see an edit post option anymore

[bigjohnthomas]

Leave it on
Man or mouse ?
Ekkk ekk pass the cheese

[Kent Discos]

Leave it on
Man or mouse ?
Ekkk ekk pass the cheese

[bigjohnthomas]

Trying to find some tyres today
But all the part worn boys only have 97 load rating
Would I get really really done if I slipped a pair of those on instead of 101s?
Or perhaps I could melt the 97 off with a hot knife and write 101 in its place

[loot]

Trying to find some tyres today
But all the part worn boys only have 97 load rating
Would I get really really done if I slipped a pair of those on instead of 101s?
Or perhaps I could melt the 97 off with a hot knife and write 101 in its place

What's the load index on the van? 18s yes van is a 290 swb?

97 is 730kg x2 gives 1460kg /axle +10% so 1500kgs /axle to be safe ish.

What axle weights does your van show?

[bigjohnthomas]

[loot]

Standard tyres? 235 45 18?

What about p/w 245 tyres maybe more common and cheaper, will need 4 tho, shop around you'll be surprised, i bet you don't buy the first pair of assless chaps you see do you?

[bigjohnthomas]

235/50/18s are standard
Bollok that there's loads of hankooks with 7mm tread on £35 fitted but they are bloody 97
He's only got 1 that's 100
There's a place in Cleethorpes that's got 4 "like new allcock fokkimg fantastic they are 55 each"
There Matador masters
Who?
245s eh? I'll enquire
It the bloody load rating thats stopping the job
Wonder how much new ones are ? Its got bloody hyflys on it atm
They can't be more than fifty quid

[boltondigger]

Spend some of that cash from under the mattress ya tight wad

i got 60 though out of a set of Matadors on the front the mk7

[need4speed]

Fitted Ford rubber floor mats today. TBH the fit is piss poor.. Oh well

[mavericktc]

Going back to aerials, I bought this.

"OEM" ford part that can be found on fords accessory site (but I bought it on ebay).

[bigjohnthomas]

Spend some of that cash from under the mattress ya tight wad

i got 60 though out of a set of Matadors on the front the mk7

I may get of those then
Got a 35quid hankook for the really bald one for now as its mot in the morning

[bigjohnthomas]

Fitted Ford rubber floor mats today. TBH the fit is piss poor.. Oh well

I got some of those for mine they are
Splendid, perfect the best mats in the world
You must be doing it wrong ?

[need4speed]

Not really possible to do anything wrong. The fittings were already in place on the floor. I trimmed the mats as required and the fittings clipped in fine. However the fixings on the passenger side move around a lot even though we're factory fitted. Also the drivers mat almost seems too wide.

[loot]

You sure you weren't given mk7 mats?
I have cheap eBay 1 piece carpet and it fits perfect with the 4 clips it locks.