by loot » Fri Jan 05, 2018 5:30 pm
Shouldn't be to hard, the bumper trim parts just pull off i think but you can replace them with ones with fog light holes, there's 2 types though, sport are different to non sport.
The lamps should probably fit on.
Fuse f8 15A does the fog lights through the bcm.
Bcm pin 16 c2280b does both fog lights live then you add a ground to each, 8mm chassis bolt will be close by on either side.
Wire colour from bcm is yellow/orange trace.
You will have to get the foglight switch for the dashboard and probably activate it in configuration to have factory fog.
You could do it externally with a relay and a switch on the dash I guess.
56 350 2.2 130ps mk7 with 2 side doors
65 290 2.2 125ps custom with 2 side doors
07 350 170ps
Ids v86 licence + v86.04 update + xprog
hereIds map
here