Ford Transit Forum

by **cycleguy** » Mon Mar 05, 2018 7:30 pm

Does any one have a wiring diagram for a 2017 limited ? as i need to find the TX/RX for the P.A.T.S at the ignition switch I have looked at the Directechs.com diagram and it shows pins 3/4 at ignition switch wire colours TX Data pin 3 yellow/orange RX Data pin 4 violet/grey. There is a violet/grey wire but there is not a yellow/orange wire so if anyone can help me out with this ?

by **loot** » Mon Mar 05, 2018 8:48 pm

What is it you are trying to do?

by **cycleguy** » Mon Mar 05, 2018 8:50 pm

loot wrote:What is it you are trying to do?

I'm fitting a clifford alarm loot

by **loot** » Mon Mar 05, 2018 8:55 pm

Ok so are you trying to intercept the key transceiver? I don't think there's any actual pats on the ignition switch just the ring separately.
I'll have a look at what I have anyway.
If you could be more specific about the function you want I may be able to find the answer if it is at the bcm.

Pm me if you want. :-)

by **loot** » Mon Mar 05, 2018 8:57 pm

Found it

by **loot** » Mon Mar 05, 2018 9:01 pm

Right the pats transceiver has 4 pins shown.

Pin 1 yellow violet power.
Pin 4 violet grey rx.
Pin 3 yellow orange tx.
Pin 2 black ground.

Bcm. Pin 1 rx.
Bcm. Pin 2 tx.

Groovy :-)

by **loot** » Mon Mar 05, 2018 9:03 pm

Hang on a fookin minute

2017 you say?

Euro 6 2.0l?

No no no loot there's no rx and tx at the pats only.

Pin 1 power
Pin 3 lin
Pin 4 ground.

Need to think about this now then :-(

Are you out of the bath yet?

by **cycleguy** » Mon Mar 05, 2018 9:22 pm

Here is the wiring diagram that I'm following
file:///C:/Users/M4RKE/Downloads/403-FORD13-1.02-ORI_2017-Ford-Transit_IG_EN_20171212%20(9).pdf
This was after I put my van details into Directed site that is for installers that install directed electronics products
And as you say there is the 4 pin plug there but it only has 3 wires and not the colours as per diagram. And yes its a euro 6 spec van

by **loot** » Mon Mar 05, 2018 9:27 pm

The link doesn't work :-(

by **cycleguy** » Mon Mar 05, 2018 9:46 pm

Try this you will need to fill out make and model in the drop down boxes and the diagram you need to look at is the DB3

https://www.directechs.com/

by **loot** » Mon Mar 05, 2018 10:03 pm

It's for USA transit mk8 2017.

Which model Clifford is it that I download?

by **cycleguy** » Mon Mar 05, 2018 10:07 pm

loot wrote:It's for USA transit mk8 2017.

Which model Clifford is it that I download?

They are not the best diagrams as they assume you are installing a remote start I have been having a look on the net and I believe that UK vehicles will not have PATS fitted after all that but thanks for you help loot

by **loot** » Mon Mar 05, 2018 10:10 pm

I mentioned above that the 2017 doesn't have tx/rx.

I'm still not sure what you are trying to do though, remote start? Keyless start? Clifford unlock rather than the Ford remote?

Has anyone said there's a workaround?

by **cycleguy** » Mon Mar 05, 2018 10:15 pm

loot wrote:I mentioned above that the 2017 doesn't have tx/rx.

I'm still not sure what you are trying to do though, remote start? Keyless start? Clifford unlock rather than the Ford remote?

Has anyone said there's a workaround?

Fitting the Clifford along with the DB3 will allow you to use just the ford key to arm and disarm the alarm when you lock the van as per normal

by **cycleguy** » Mon Mar 05, 2018 10:17 pm

Do you have a drawing of the BCM loot ?

Ford Transit Forum

NOW BOOKED FOR 2024 Transitmania 15 @ Santa Pod 19th to 21st July 2024 ALL DETAILS HERE

P.A.T.S Connections ?

P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Re: P.A.T.S Connections ?

Who is online