330 rpm at 70

[TPM961]

Looking to buy a 330 lwb custom at the end of the week, just out of curiosity can anyone comment as to how fast the engine is spinning at 70?
Cheers

Sent from my ONEPLUS A3003 using Tapatalk

[bigjohnthomas]

It'll depend on the diff init boss? PS n stuff like that
So it prob won't be out like mine

[TPM961]

I wasn't aware they had different diff ratios? It's a 125ps.
If it's anywhere around the 2k mark I'm happy!

Sent from my ONEPLUS A3003 using Tapatalk

[bigjohnthomas]

Well mk7s do
But some have 6speed and some 5 speed boxes
So I don't know really I only wash dogs arses
But mines a 155 sport, etis used to tell you diff ratios but it say bugger all now thanks to the bloody eu and jean claud spunker

One would think a 330 might be higher reving to pull an extra half tonne perhaps

[Altransit]

And in a 5 speed Mk7 with a 4.23:1 diff and 15" wheels

VariousPics 005.jpg

[TPM961]

I'm aware the mk7's used to, but as you say they had a 5 speed variants.
My mk5 lwb has 5.13 so as long as it isn't as bad as that!

2-2.5k is what i was thinking it would be

Sent from my ONEPLUS A3003 using Tapatalk

[Eggski]

I checked mine this morn and set cruise at 70 and rpm was 1800 ish, theres a 5.. something diff in mine cant remember the exact ratio.

Will do nearly a ton at 2500 rpm too.

[Altransit]

I checked mine this morn and set cruise at 70 and rpm was 1800 ish, theres a 5.. something diff in mine cant remember the exact ratio.

Will do nearly a ton at 2500 rpm too.

Your diff must be a 3..something if the revs are that low at 70 and 100, surely

[TPM961]

Thanks for the input guys, much appreciated

[Eggski]

I checked mine this morn and set cruise at 70 and rpm was 1800 ish, theres a 5.. something diff in mine cant remember the exact ratio.

Will do nearly a ton at 2500 rpm too.

Your diff must be a 3..something if the revs are that low at 70 and 100, surely

Axle Ratio:
4.188/3.045 Final Drive Ratio

Not sure where 5 came from, think I ment to type 4.