Transitmania 10 @Santa Pod 18th to 20th May 2018

2.4 Mk6 TDDI RWD LUK clutch.

Clear out your shed! Advertise your parts here! [No Trade Ads]

Moderator: Luke

2.4 Mk6 TDDI RWD LUK clutch.

Postby Jim Archer » Fri Nov 10, 2017 1:54 pm

LUK OE spec HD clutch and dual mass flywheel less lifter bearing, to suit 2002 Mk6 120 TDDI RWD Jumbo, I don't know if it will suit the 75 and 90ps. Did about 3,500-4,000miles before motor swap which came with a newish one fitted. I kept it for spare but the bodywork rust got the better of the old girl.

The crank bolts are there, and were torqued to specs, but would recommend using new ones.

It will need the diaphram spring height adjuster reset before fitting - can do this but am told it's best done just before fitting.

£250 + signed for post if required (it's bloody heavy).

All that noise is the sound of reliabilty.
Jim Archer
Transit Fanatic
Transit Fanatic
Posts: 2389
Joined: Sat Sep 29, 2007 6:45 pm
Location: Southampton

Return to Transit Parts For Sale

Who is online

Users browsing this forum: Riggard