Thequeenscheese wrote:Yellow video red power if I remember connect the black plug to reverse light and plug it into the red plug yellow goes back to the radio I thinks..
Thequeenscheese wrote:it's basically the same as runs from your tv aerial to your TV
richgold wrote:The red wire that is with it should be connected to the Reverse control cable input number 12 on your head unit.
HuMpH wrote:That's what I missed somehow I just didn't register the info at number 12
richgold wrote:Thequeenscheese wrote:it's basically the same as runs from your tv aerial to your TV
The lead pictured above is a shielded RCA lead with a trigger wire, a tv antenna lead is made from a male and female Belling-Lee connector and some coax, so not the same.
If you need a longer wire and want the same thing here's a 10m one.
https://www.ebay.co.uk/itm/10M-Car-RCA- ... SwPAxaSyQB
HuMpH wrote:One more quick question on wiring..sort of related lol, unit now installed just need to connect rear camera which Im about to do today.
But after fitting the head unit I went into settings to set up swc ect, all went well everything working but then noticed the buttons on unit do not illuminate.I went into setting and there is a section to choose different colours, when I choose one it lights up the buttons for a second or so then they go off again.
Does anyone know which pin in the original muliplug may feed this ? I do have the small loom which has camera input and it has orange wire for illumination so I could find a switched live and connect to that but it's a bit strange they light up when selecting colour but then go off again.All ideas welcome
Looks pretty nice..
Return to Mk6 & Mk7 - Third Generation Transits
Users browsing this forum: Google [Bot]
This site contains affiliate links for which we may be compensated.