Hey guys, I had my fuel pump go on me a few weeks ago and had a new one fitted but I now seem to have a drive belt problem that wasn't there previously.
The belt appears to be moving forward towards the front of the van at the alternator and crank pullys. I bought a new belt and tensioner but its still doing it.
Looking under the van and up towards all the pullys I can see that the fan pully is very shiny where the belt should be sitting but its now much more forward towards the front of the van near where the pully starts to round off.
so I'm wondering if perhaps the garage has forgotton to replace anything here?, it doesn't look like the fan is properly housed into the shroud that covers the rad so I'm thinking its sitting too far back and this is causing the belt to slip forward and then causing the alternator pully to go out of alignment then causing the cranks pully to do the same.
Any help would me much appreciated.