MK6 WITH MK7 FRONT CAN IT BE DONE

[Konnect]

Have a look at this

http://cgi.ebay.co.uk/Transit-recovery- ... 3a59d941ba

Does that look nice or what but I thought it can't be done.

[Scotty86]

It can be done, there's a few on here who's done it

[psv-hgv-flt]

as Scotty86 said, but they say it is a real b*stard (some bits)

[ake]

Quite a few about now, You need to change inner wings and scuttle panel as well

[towncruiser]

i clicked the link but nothin come up

[trigger]

I clicked the link and every van under the sun came up

[AndyG]

[Nadjenka]

That one from Transitmania was nicely done

Konnect, did you mean this one on e bay? ...it's in e bay section too...

[Jasonthemove]

I cut my bonnet open with an angle grinder, badly dented wing, cracked plastics round headlights, front bumber badly cracked, there fore I really want this conversion , does anybody know who can carry this out.

[mrtjr2010]

if you supply your own parts
then these guys can do it for you
give them a ring on
07920843147 OR 07825346729 ( based in west yorkshire
price will roughly be about £1200-£1500ish
these are the parts i got told you will need as well
COMPLETE FRONT END, BOTH
HEADLIGHTS, HEADLIGHT PANELS, SLAM PANEL, BONNET AND
HINGES, BUMPER COMPLETE WITH BUMPER BAR, BOTH WINGS
AND BOTH INNER WINGS


here is one they have done
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123

( i found this info out as i was enquiring about it myself )

hope this helps
cheers t.j.r

[rwd lynch]

if you supply your own parts
then these guys can do it for you
give them a ring on
07920843147 OR 07825346729 ( based in west yorkshire
price will roughly be about £1200-£1500ish
these are the parts i got told you will need as well
COMPLETE FRONT END, BOTH
HEADLIGHTS, HEADLIGHT PANELS, SLAM PANEL, BONNET AND
HINGES, BUMPER COMPLETE WITH BUMPER BAR, BOTH WINGS
AND BOTH INNER WINGS


here is one they have done
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123

( i found this info out as i was enquiring about it myself )

hope this helps
cheers t.j.r

what they suppling and what are they doing for £1200-£1500ish?

[mrtjr2010]

as far as im aware its just the service ( time) to do it. and you supply the parts im unsure have to ring them to find out.

[rwd lynch]

as far as im aware its just the service ( time) to do it. and you supply the parts im unsure have to ring them to find out.

i'll do it for half that price.

[Grovesy]

That one from Transitmania was nicely done

Konnect, did you mean this one on e bay? ...it's in e bay section too...

Thats my mates truck