Mk3,4,5,6,7 bits.....Bullbar,wind deflectors lockshield etc

[Frag]

Only picture i have at the minute,vans at work.
Basically its exactly same shape as window internally with tabs all way round to bolt screw or rivet to door.
Made for job not an old bread tray .
I can get pics but may be mon,Sat at earliest.....

[Vandalism]

was just debating if it would fit my van

[Frag]

Next time i have the mis-fortune to be at work, i`ll fetch it home & get you some measurements.

[Vandalism]

thanks - i think somone said somwhere the window in a mk5 bulkhead is the same as a mk1/2/3/4 one so im hoping the rear window is a similar size

[Leeday]

Hi, Is the bar that protects the rear bumper bolted to the towbar or is it part of the towbar and is it for sale Cheers.

[Frag]

Its just a piece of angle iron,bolts to bumper with brackets but sort of rests on towbar.
previous owner fitted it.
You can have it for me if you pick it up.......
I`ll probably remove towbar anyhow before van gets squashed.

[Leeday]

Its just a piece of angle iron,bolts to bumper with brackets but sort of rests on towbar.
previous owner fitted it.
You can have it for me if you pick it up.......
I`ll probably remove towbar anyhow before van gets squashed.

ok, many thanks for that, can you keep it for me then and I will sort out a date to come visit you,, I am at j16 of M1. many thanks, Lee.

[Havoc99]

wing mirror arrived today
well packaged and in perfect condition
many thanks

[Frag]

Rear window grille measures;
22" deep,55" wide across bottom tapering to 52" at top........
The securing tabs stick out about 1" around the perimeter,if that makes sense

[Vandalism]

thanks frag ill have a measure up

[hustler86]

got ant pics off the wind deflectors ??
thanks daniel

[hustler86]

got ant pics off the wind deflectors ??
thanks daniel

all so got a price for them
thanks agen daniel

[Frag]

Everything sold now apart from;

Mk4 (and 3 i guess) Killtech lockshield for steering lock & ignition barrel.
Armoured surround for steering lock/ignition,good deterrant for older vans.....With modified column covers to fit.

Mk3/4/5 Rear window internal security mesh for tailgate vans/tourneo,originally A.A fitment proper thing.

Scrapper also has a full set of 'Custom' bodyside mouldings for a 150S van,(except 1 under fuel cap) which could be re-used,i`ll check condition of these tmrw,i think they're all there and useable

Used fuel cap with a brand new plain key for a mk6 (/7?) bought for a fiesta which are smaller

Thanks.

[Vandalism]

forgot to ask your location and price on the window mesh...i think it might just fit

[Frag]

Ressurected this old thread,still got the following bits only


Mk4 (and 3 i guess) Killtech lockshield for steering lock & ignition barrel.
Armoured surround for steering lock/ignition,good deterrant for older vans.....With modified column covers to fit.

Mk3/4/5 bullbar,full wraparound thing with spotlight mounts & towing eye built in,has rot in lowest 2 bars so will need them removing/repairing or bodging to some degree......Needs blasting and coating/painting too,got mounting bolts.


Used fuel cap with a brand new plain key for a mk6 (/7?) bought for a fiesta which are smaller .

Will post pics in a bit for interested parties.......Some on previous page
Not sure on prices,make me a sensible offer.Collection preffered but will post if nesc.
Except bullbar ......I may meet for fuel cost within reasonable distance.
Items Nr J36 M1,South Yorkshire.