Electric Seats

[Frodo]

I have a set of electric seats for sale from a BMW E45 which I never got around to fitting in my van and are now in the way.

Full electrics including lumber support (the drivers seat has a memory button, but I am told the memory function will only work in a BMW) Fully working and in excellent condition, complete with wireing ready to run straight to a 12v power source.

Paid £320, but will take £150 from the first person who can take them out of my way as I am sick of moving them.

Collection from Broxbourne, Herts - 10 minutes from J25 of M25

If you would like pictures, pm me with your normal email address and I will send them......

[Graham Taylor]

Can you upload the pics on here?

[GKandR4CH]

Can you upload the pics on here?

With the luck you've had Graham it may take you 3 months to fit them

[Graham Taylor]

Can you upload the pics on here?

With the luck you've had Graham it may take you 3 months to fit them

You mean the price doesnt include fitting?

[Frodo]

I don't think I know how to upload them here and may not be able to as a newbie

[Graham Taylor]

Email them to me here sales@digitalphotoevents.co.uk and I'll stick em up for you.

[Madasahatter]

can I have a electric chair for the mother in law

[Graham Taylor]

Here they are. Have these been modded to fit a Connect at all?

[Frodo]

They are not converted and also, they are in excellent condition - they dont look good in the pictures, but thats just dust.

[Frodo]

Now £100 to the first person who can get them out of my way

[Graham Taylor]

What is needed to fit the Connect? Cant tell from the pics.

[GKandR4CH]

Heated???

[mattvik30]

easiest way and same as with any other seats is to cut the feet of your connect seats and the new seats, drill two holes in each and bolt to the new seats runners. You can also weld them afterwards if you like but you dont have to. As long as you have an angle grinder and a decent drill with correct drill pieces, then its a couple of hours work.

[GKandR4CH]

Bang on Mattvik.
Make the seat fit the Connect runners.
I normally drill new holes and then nut and bolt it.

[Graham Taylor]

Bang on Mattvik.
Make the seat fit the Connect runners.
I normally drill new holes and then nut and bolt it.

No runners on the passenger side as it has the silly seat! So what do you do for that one?