My 1 previous owner 51k lwb auto 150 in radiant red!

[MinorMatt]

I have a pair of aftermarket sliders... BUT in order to get the 2nd one (non SLD one) I would need to fix that area on my van to put my genuine ones in.

I *might* be able to get a pair of genuine non sliders at the weekend

Proper mounting = M12 bolt through floor with 100 x 100 x 8mm steel spreader plate underneath

I don't know the seller of those seats, I just looked for ones nearby on ebay

What you are looking for is "Unwin Tracking" e.g.http://www.ebay.co.uk/itm/UNWIN-TRACKIN ... 2320b6fa05

[Richieintransit]

Hi Matt
Don't worry at the mo as I have just won a v230 2 secs ago that i didn't expect to win so I suppose I have to go and buy that now lol

[Richieintransit]

Here are latest pics as you can see she needs a good mop but is now rust free apart from a few minor spots

[Richieintransit]

when she is wet she looks fantastic as it's all the same colour, a few hours polishing she will look amazing, I wish I could do it but it kills me to hold the polisher,

[Richieintransit]

went straight through mot today, just advised on 2 break pipes which I have just purchased and going to get them fitted,,, or are they easy to fit? it's the 2 front flexi hoses, are they easy to do? mine are a bit rusty so not sure how to get them undone,,,??

v class is awful and I'm having to do lots of work to it, got totally ripped off with that,, can always depend on my good old transit,

[captain hook]

A wiseman once said "where there's a richie there's a e-bay mug to buy junk"

[Richieintransit]

A wiseman once said "where there's a richie there's a e-bay mug to buy junk"

your such a funny man,,, you've obviously got such a sad life all you have time for is writing shitty messages to me,, and for no reason other than the fact I didn't buy your van because you were too far away,,, get a life will you your boring me now

[captain hook]

A wiseman once said "where there's a richie there's a e-bay mug to buy junk"

your such a funny man,,, you've obviously got such a sad life all you have time for is writing shitty messages to me,, and for no reason other than the fact I didn't buy your van because you were too far away,,, get a life will you your boring me now

Truth always hurts...

[Richieintransit]

A wiseman once said "where there's a richie there's a e-bay mug to buy junk"

your such a funny man,,, you've obviously got such a sad life all you have time for is writing shitty messages to me,, and for no reason other than the fact I didn't buy your van because you were too far away,,, get a life will you your boring me now

Truth always hurts...

you should know

[Eric b]

great read rich, van looks the biz. be using this post as a reference for future work on me arches cheers

[Richieintransit]

great read rich, van looks the biz. be using this post as a reference for future work on me arches cheers

cheers mate, thanks for taking the timer to read it all, enjoy yourself,
Rich

[dieselhead123]

You have done a wonderful job on that van fella.

Shame we won't be seeing you and it at Mania.

Enjoy your weekend!

TIM

[Richieintransit]

thanks buddy,
I'm gutted it's on the same weekend as my local festival, and on the sunday we are rehearsing for a wedding we've got on the first of september,,, would have loved to have come and shown you all the van and met the people who have been watching my progress and keeping me going
but I'm sure we will all get a chance to meet up soon

Richie
http://www.youtube.com/watch?v=t_4i3mGo ... r_embedded

[condorman]

Hi Richie,
Thank's for putting me on to this from you tube. Brilliant what you've done, well done. I'm having a good read through your posts before i start on my p reg trannys wings n sills. Got all the bits it's just making that first cut with the angle grinder, once I make that first move there's no going back and ill be on my merry way with your very informative posts to follow. Keep well Mateyyyyyyyyy.
Mark

[Richieintransit]

Ahhh yes I remember hovvering over the van for quite a while pondering the first cut the worst bit was trying to work out where to cut the sill for the arch, too long or short and the door won't fit or line up, if you leave the sill in tact and cut all the arch away then you can offer up the new bit and line it up and mark it out, I should really have put the door back on and made sure but I just went for it and thankfully I didn't get it wrong, lining it all up probably took more time than welding in probably me making doubly sure as I didn't want to get it wrong give your panels a good coat of hammerite or something on the inside too I did it and am hoping it'll keep the rust back for longer, the paint on the new panels is very thin primer and will let moisture in, I have seen so many people do all this work only to find the rust returns very soon and you have to do it all over again,,,
need any help, just ask, if your near me and your van's not a high top you can even rent my shed and use my tools for a small fee,
best panels were hadrian the other ones I got needed lots of mods to fit, and if I did it again I'd change the whole wing as think it would save lots of time and filler
cheers guys

anyone ever changed front brake hoses I'm not sure how to do this?