Need a driveshaft timing pulley and nut that fits a DAG Ve/8720a injection pump which was made for the 2.5td 100ps. The shaft size is 20mm with a 13mm thread where as a Bosch and Lucas Epic are 22mm with a 16mm thread nut.
Can anyone help.
Thanks
Reggie
*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*
DAG VE/8720A Epic/Transit Pump
Moderator: Luke
3 posts
• Page 1 of 1
DAG VE/8720A Epic/Transit Pump
by Reggie1 » Mon Apr 25, 2022 3:41 am
- Reggie1
- Transit Addict
- Posts: 20
- Joined: Sat Jan 21, 2017 10:24 pm
- Location: Sunrise Beach, Queensland , Australia
Re: DAG VE/8720A Epic/Transit Pump
by Tania » Tue Sep 30, 2025 11:12 am
Hi, there was no reply for this post. I have just purchased the same DAG VE/8720A to swap over my Lucas epic in my 2.5td transit. Wondering if the person that put the post up had any success with finding the parts mentioned in the post. Thankyou in advance Tania
-
Tania - Transit Addict
- Posts: 62
- Joined: Tue Jan 22, 2019 11:59 am
- Location: Australia nsw
Re: DAG VE/8720A Epic/Transit Pump
by MinorMatt » Tue Sep 30, 2025 1:01 pm
What is this pump? I take it that its not an EPIC?
Lucas Laser 2000/IDS
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
95 Pre Production DRW TD Highcube
95 Hallmark
96 150 100PS LWB Hi-Top
96 Autosleeper Duetto
06 Mk7 (scrap)
09 140PS T330S 2.2
Gaffa tape is like the force, it has a light side, a dark side, and it holds the universe together
-
MinorMatt - Transit Extremist
- Posts: 24611
- Joined: Mon Sep 17, 2007 7:53 pm
- Location: Herefordshire/Gloucestershire/Berkshire
3 posts
• Page 1 of 1
Return to Transit Parts Wanted
Who is online
Users browsing this forum: No registered users