Transitmania 11 @Santa Pod 17th to 19th May 2019


Oil cooler assembly

Need a certain part? Ask on here!

Moderator: Luke

Oil cooler assembly

Postby Airthies » Thu Jan 03, 2019 9:45 pm

Looking for a 2.2/2.4/3.2 oil filter/cooler mounting housing.
Doesn't need to be one that's fit to use as planning on cutting it to bits but don't want to buy a new one to cut it and find my plans not going to work.
Like the one in the pic.

Looking to make a remote filter Image

Sent from my anu5 using crapatalk
Back now, well for a bit anyway.....
2008 350LWB 115PS ex welfare van
2008 350LWB 115PS ex fitters van + other things....
V86+patch
V86.04
X-Prog
C81
User avatar
Airthies
Transit Fanatic
Transit Fanatic
 
Posts: 3344
Joined: Fri May 03, 2013 10:10 pm
Location: Stirling, Scotland, & rest of the world

Re: Oil cooler assembly

Postby andz327 » Fri Jan 04, 2019 8:40 pm

Airthies wrote:Looking for a 2.2/2.4/3.2 oil filter/cooler mounting housing.
Doesn't need to be one that's fit to use as planning on cutting it to bits but don't want to buy a new one to cut it and find my plans not going to work.
Like the one in the pic.

Looking to make a remote filter Image

Sent from my anu5 using crapatalk
Is the 2.4 same as 2.2 ??
I should have one somewhere when i changed to the canister type

ANDZ
User avatar
andz327
Transit Fanatic
Transit Fanatic
 
Posts: 3093
Joined: Thu Jan 14, 2016 3:44 am

Re: Oil cooler assembly

Postby Airthies » Fri Jan 04, 2019 8:54 pm

Think it's the same but not entirely sure

Sent from my anu5 using crapatalk
Back now, well for a bit anyway.....
2008 350LWB 115PS ex welfare van
2008 350LWB 115PS ex fitters van + other things....
V86+patch
V86.04
X-Prog
C81
User avatar
Airthies
Transit Fanatic
Transit Fanatic
 
Posts: 3344
Joined: Fri May 03, 2013 10:10 pm
Location: Stirling, Scotland, & rest of the world

Re: Oil cooler assembly

Postby bambi mk 1 » Fri Jan 04, 2019 9:32 pm

FWD coolers wont fit RWD :wink:
Theres the good guys,theres the bad guys but there only ever be one SPEED GUY
User avatar
bambi mk 1
Transit Extremist
Transit Extremist
 
Posts: 6700
Joined: Sat Nov 17, 2012 10:05 pm
Location: 24 Years living next door to Alice

Re: Oil cooler assembly

Postby karl » Fri Jan 04, 2019 9:47 pm

bambi mk 1 wrote:FWD coolers wont fit RWD :wink:


is that because they are smaller ?

the one iam sending him is a rwd drive one :D
User avatar
karl
Tranny Lover!!!
 
Posts: 8548
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester

Re: Oil cooler assembly

Postby Airthies » Fri Jan 04, 2019 10:33 pm

bambi mk 1 wrote:FWD coolers wont fit RWD :wink:
It'll fit wherever I dam well put it! it's fr a remote filter project but one the same as the one that on at the mo would be better
Is the 2.2 FWD diferent than the 2.2 RWD?
Or is it just 2.0 FWD as I know that's not the same!

Sent from my anu5 using crapatalk
Back now, well for a bit anyway.....
2008 350LWB 115PS ex welfare van
2008 350LWB 115PS ex fitters van + other things....
V86+patch
V86.04
X-Prog
C81
User avatar
Airthies
Transit Fanatic
Transit Fanatic
 
Posts: 3344
Joined: Fri May 03, 2013 10:10 pm
Location: Stirling, Scotland, & rest of the world

Re: Oil cooler assembly

Postby Airthies » Fri Jan 04, 2019 10:36 pm

andz327 wrote: I should have one somewhere when i changed to the canister type

ANDZ


If I can sort out a plan I was thinking of getting a spin on filter one for the final assembly.

Sent from my anu5 using crapatalk
Back now, well for a bit anyway.....
2008 350LWB 115PS ex welfare van
2008 350LWB 115PS ex fitters van + other things....
V86+patch
V86.04
X-Prog
C81
User avatar
Airthies
Transit Fanatic
Transit Fanatic
 
Posts: 3344
Joined: Fri May 03, 2013 10:10 pm
Location: Stirling, Scotland, & rest of the world

Re: Oil cooler assembly

Postby andz327 » Tue Jan 08, 2019 11:17 pm

Airthies wrote:
andz327 wrote: I should have one somewhere when i changed to the canister type

ANDZ


If I can sort out a plan I was thinking of getting a spin on filter one for the final assembly.

Sent from my anu5 using crapatalk
Fwd definitely different from rwd mate
ImageImage
User avatar
andz327
Transit Fanatic
Transit Fanatic
 
Posts: 3093
Joined: Thu Jan 14, 2016 3:44 am

Re: Oil cooler assembly

Postby Airthies » Tue Jan 08, 2019 11:43 pm

Hmmm... pants

Sent from my anu5 using crapatalk
Back now, well for a bit anyway.....
2008 350LWB 115PS ex welfare van
2008 350LWB 115PS ex fitters van + other things....
V86+patch
V86.04
X-Prog
C81
User avatar
Airthies
Transit Fanatic
Transit Fanatic
 
Posts: 3344
Joined: Fri May 03, 2013 10:10 pm
Location: Stirling, Scotland, & rest of the world


Return to Transit Parts Wanted



Who is online

Users browsing this forum: No registered users