*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


2.4 Di Cylinder head Camshaft cage - WANTED

Need a certain part? Ask on here!

Moderator: Luke

2.4 Di Cylinder head Camshaft cage - WANTED

Postby JustaTransit » Fri May 29, 2020 4:21 am

Does anybody have a Cylinder head camshaft cage for a 2.4 Di motor DOFA. That you would like to sell ?


Sent from my iPhone using Tapatalk
JustaTransit
Newbie
 
Posts: 8
Joined: Mon Nov 19, 2018 5:51 am

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby knobby1 » Fri May 29, 2020 5:00 am

JustaTransit wrote:Does anybody have a Cylinder head camshaft cage for a 2.4 Di motor DOFA. That you would like to sell ?


Sent from my iPhone using Tapatalk


Aren't they matched to the cyl head..??

Lord Knobrot
2008 2.4L RWD 170+PS 6-speed 350 LWB High Roof.

When I die, I want to go peacefully in my sleep like my Grandfather, not screaming like the passengers in his car..!
User avatar
knobby1
Transit Extremist
Transit Extremist
 
Posts: 15734
Joined: Tue Oct 21, 2014 1:36 am
Location: Brisbane, Australia

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby JustaTransit » Fri May 29, 2020 6:51 am

They can be lapped in to suit the cam journals..... if the cage is too worn then it needs to have material added to the journal area & machined to suit.


Sent from my iPhone using Tapatalk
JustaTransit
Newbie
 
Posts: 8
Joined: Mon Nov 19, 2018 5:51 am

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby Jim Archer » Fri May 29, 2020 10:41 am

Lapping is only any help if there's a couple of thou' discrepancy. Machining needs the mating face skimmed to give enough meat to centre the top caps with the lower halfs.

May as welll just swap the whole head for the hassle it would save.

Jim
Mk7 140 Jumbo - Vantunered.
289,000 and counting.
Jim Archer
Transit Fanatic
Transit Fanatic
 
Posts: 3434
Joined: Sat Sep 29, 2007 6:45 pm
Location: Southampton

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby JustaTransit » Fri May 29, 2020 11:28 pm

Okay Thanks for your feedback Jim ... much appreciated.


Sent from my iPhone using Tapatalk
JustaTransit
Newbie
 
Posts: 8
Joined: Mon Nov 19, 2018 5:51 am

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby karl » Sat May 30, 2020 6:40 pm

ive got a engine with leg out of bed

in manchester £300 for the block and head
User avatar
karl
Tranny Lover!!!
 
Posts: 8963
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby JustaTransit » Sat May 30, 2020 8:24 pm

Thanks Karl... If I was closer to the UK it would be a done deal. I’m in Queensland Australia.... the freight cost makes it to expensive.... Cheers


Sent from my iPhone using Tapatalk
JustaTransit
Newbie
 
Posts: 8
Joined: Mon Nov 19, 2018 5:51 am

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby karl » Sun May 31, 2020 12:57 am

JustaTransit wrote:Thanks Karl... If I was closer to the UK it would be a done deal. I’m in Queensland Australia.... the freight cost makes it to expensive.... Cheers


Sent from my iPhone using Tapatalk


Not many Australians here buddy and these vans are getting rare by the day
User avatar
karl
Tranny Lover!!!
 
Posts: 8963
Joined: Tue Jan 08, 2013 9:03 pm
Location: manchester

Re: 2.4 Di Cylinder head Camshaft cage - WANTED

Postby JustaTransit » Sun May 31, 2020 7:12 am

No worries Thanks mate


Sent from my iPhone using Tapatalk
JustaTransit
Newbie
 
Posts: 8
Joined: Mon Nov 19, 2018 5:51 am


Return to Transit Parts Wanted



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.