Mk5 Bosch injector pump bracket

[Travelingtranny]

Hi legends, I'm from Australia and am having no luck tracking down a mk5 bosch injector pump bracket. Have resorted to this group as a last resort. Please someone help me out and sell me a bracket. I need to do this fuel pump conversion and get the tranny back on the road. Cheers!

[MinorMatt]

The part that goes between the engine block and the back of the injection pump? I'm struggling to get them here now as well.

Show us a pic of what you have?

[Travelingtranny]

Yes that is correct, it is the bracket between the block and the pump. Have attached photos for reference. Cheers for the reply

[MinorMatt]

Thats a shiny pump!

I have one bracket on the shelf, but its not really a spare because I have 6 pumps without!

I will see what I can find...

[Travelingtranny]

Mate if you could help me out it would mean more than you know. The car has been off the road for two months now because I can't find a bracket. Can't believe it is this hard to find parts. Would pay whatever you ask for the bracket. Also have a spare mk5 without the pump if you need any other parts maybe we could trade? Thanks again

[MinorMatt]

It looks like I might be able to get some new ones...

But I have thought this before, ordered, and then be told that they arn't available. Have ordered a couple - so fingers crossed!

Will come in at £30 + P&P

[Travelingtranny]

That's great, I really appreciate your help..
My email address is dannystarr10@hotmail.com
Could you please email me your contact details eg phone number and email so I can get in contact with you and discuss details. Thanks again mate!!

[MinorMatt]

Will get in contact when I know for certain one way or the other

[Travelingtranny]

Ok no worries, thanks mate

[Chug]

I'm pretty sure I will have the older style pump bracket on one of the pumps I have kicking about, I'll have a look later and take a picture if that is any good?

[Travelingtranny]

That would be much appreciated thanks mate.

[Chug]

CIMG0104.JPG

CIMG0103.JPG

CIMG0105.JPG

[Altransit]

That bears a remarkable similarity to the bracket used to attach a chain link fence wire to the concrete end post

Maybe one could be adapted in the event of not being able to procure the correct thing

[Travelingtranny]

Thanks chug!!
Have private messaged you.

[Chug]

The black right angle bracket is easy enough to fabricate Al, but the brassy coloured plate that bolts around the injector outlets on the back of the pump is a little trickier Although not to difficult a job if one has the correct tools.

Danny, PM replied.