*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Pinto crankcase ventilation oil separator

Need a certain part? Ask on here!

Moderator: Luke

Pinto crankcase ventilation oil separator

Postby Mr twin choke » Thu Jun 01, 2023 7:54 pm

I am currently rebuilding my 2.0 pinto engine and found when replacing the PCV valve that the cylindrical oil separator that fits in the side of the block which the PCV valve fits into has corroded through in 2 places. Does anyone have a spare one they might be willing to sell? I've tried to source a new one from all my usual engine parts suppliers without success so any help would be much appreciated
Mr twin choke
Transit Addict
Transit Addict
 
Posts: 20
Joined: Fri Jun 08, 2018 8:52 pm

Re: Pinto crankcase ventilation oil separator

Postby Chug » Thu Jun 01, 2023 9:33 pm

Can't you just plumb it into an oil catch can instead?

Is it this type
https://www.ebay.co.uk/itm/364160058765 ... gokw%3D%3D

or the black squarer one?
1991(J) twin wheel tipper 2.5di
1994(L) twin wheel tipper 2.5di
Chug
Transit Fanatic
Transit Fanatic
 
Posts: 2464
Joined: Tue Jan 02, 2018 9:27 pm
Location: Tring, Hertfordshire

Re: Pinto crankcase ventilation oil separator

Postby Mr twin choke » Fri Jun 02, 2023 7:46 am

Yes that's the right one rather than the squarer one. I'm trying to avoid fitting a catch tank as I'd like to keep it looking as original as possible
Mr twin choke
Transit Addict
Transit Addict
 
Posts: 20
Joined: Fri Jun 08, 2018 8:52 pm


Return to Transit Parts Wanted



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.