Smiley propshaft.

[Muttley]

Needed, a propshaft for 1999 diesel LWB minibus. Preferably with circlips on the uj. I am in East Hampshire but dont mind a little travelling, cheers.

[Keef]

100, 150 or 190 Single or twin wheel?

I've got some props here in RH14 but would need lengths of each section to be sure.
They're unlikely to be circlip type UJs though.

[Muttley]

Its a 190 single wheel, i only need the rear section, I will measure it tomorrow, cheers.

[Muttley]

The woman has gone on holiday in the van, bear with me for measurements.

[Muttley]

She will be back Thursday and I will measure it

[dumper]

If it’s only a worn u/j why not take it a specialist’s and get them to fit new one.

[Muttley]

She doesn't want to be without the van, so I want to fit one and then get the other one overhauled.

[dumper]

Every time I’ve had to have one done they needed shortening as I was fitting a o/d box from a lwb into a swb and it was done while I waited worth trying a local to see if they can do the same better with a new joint then a used one

[Muttley]

I have the size now, 1.2metres from centre bearer to diff flange.

[Keef]

I'll have a look to see what I've got on Monday when I'm next at the workshop.

[Muttley]

Cheers.

[Keef]

All my props got mixed up when they got moved so I've no idea what came from what van.
Pics 2 and 3 are the longer prop. Pics 4 and 5 are the shorter prop

20240917_132425.jpg

20240917_133432.jpg

20240917_133519.jpg

20240917_133358.jpg

20240917_133340.jpg

[Muttley]

Ok thanks, I will have to drop it off and measure accurately.

[Muttley]

I will, one day, I promise.