side loading door

[bondyfnm]

Hello peeps, I was trial fitting my new modulars the other day and the side loading door fouls them.
Just wonderd if there's a thread about solutions to fix this on my smiley.
If not has anybody got any suggestions?

[Aardvark]

This question has been asked many times.............
Never gets an answer...........
Gull wing mod the side loader on gas rams?
Space out the slider rail from the body?
Cut a large notch out of the offending corner of the door and weld it back onto the body?
Lengthen the wheelbase?

[AlanN]

Transit modulars have an offset for the Transit MK2/3, which have narrower axles which allows for banding and 245/255 tyres. Fitting a narrower tyre will help, but if you have redrilled Land Rover Modulars then the offset is even wider, packing the rail will help a little, but Ive never heard of anyone cutting the door down, but its an option

[Aardvark]

Cutting the door was a trick we used in the 70's-80's when fitting ridiculously wide tyres and then fabricating big arches to cover them. Its a lot of work cutting, shutting, and then re-shaping the door seal but it works.