Our MK6-MK7 Tourneo Front End & Dashboard Conversion

[paul2012]

This is how I have just done one on a members van (Top section of X-member)

[paul2012]

Do you still want yours done

[tony&kasia]

Just to let you guys know i decided to break the tourneo in the end as it had too much rot.
I do have another project that is being worked on at the moment by paul2012 viewtopic.php?f=27&t=169904

I'm sure you will enjoy the thread

[stugg77]

Any more updates for this build?

[tony&kasia]

Any more updates for this build?

It's sitting in the breakers slowly getting stripped
I do have a few parts from it fitted on my mk7

[Troy123]

Hi new to the sight any help on mk7 stalks to mk6 wiring plz any help much appreciated av got few pics but not seen any of the realy thing that PEOLE have done many thanks

[Troy123]

Hi new to the site mines a minibus 2003tddi not tdci no tow bar from what av seen any help be great
Plz seen loads pics on here but all going by letters on my mk6 plugs are only number
Is possible to send me any pics on how to do
Air bag
Horn
An stalks plz many thanks

[Troy123]

A big thank you to paul2012 who has posted some great info with his project including wiring details for the screen & hazzard switches etc Paul2012 is going to do our mk7 front end conversion So we are really happy about that

No problem m8

I will be posting wiring details for column switchgear at some point over the weekend

Hi mate any pics of how u did the stalks air bag an so on plz am struggling to find

[Troy123]

Ok some updates as not really had any time to do much due to work & family life. I have took pictures & will post soon. But I have got the dash board in & have everything mk7 fitted. I fitted a c max steering wheel & looks good. I still got a bit of wiring left to do but upon checking what I have done so far the front & rear screen switches work that I got from a c max. The indicators work with the mK7 stalk. The horn works & airbag is connected. The mk7 key reader works as the engine starts. The modified hazard switch works. Just got front & rear wipers to do & the high low beam flashers. So all good.

The ducting was a pain because I had to modify the one behind the glove box again because the glove box would not close.
The only problem at the moment is my speedo is jumping up to 20mph when I start the engine. Could that be down to the battery as I always have to jump start it? It done the same with the old clocks so I know it's not the clocks.

Next job is to get the tailgate fitted & the back straightened out. I did fit the new carpet arches when dash was out. I nearly forgot
Not fitted gear cables yet. Hope to do that the weekend

Hi mate any pics on wires for air bag horn an key reader plz an trying clock Paul’s link but every time it just says not
Autorotation that’s

[Custompdg]

Hi guys, would you have the wiring diagram for the key reader and the wipers plz