Revolving rear lights any idea where from?

[chalkie]

I have been searching high and low for revolving rear lights for my beaver tail with no joy. Perhaps if i knew the proper name for them i would find them on ebay even.

Need something to fit on top of the bed that will turn to the side for loading purposes as the ones fitted below the bed keep decking and smashing

[Eugene Speed]

You need to find a metalworker/welder/fabricator who can make up some backplates and brackets to accommodate commercial rear light units such as the Rubbolite 360 or 461 series (from TTC or their approved stockists, go to www.ttcuk.co.uk and download their electrical catalouge in PDF form), explain to your fabricator how the lights are required to swing out of the way when loading etc. Either then get the lights hard wired to your existing wiring system or add suitable DIN connectors so you can unplug the lamp/backplate assemblies and remove them completely from the truck if need be.

[darkbluevanman]

Q.....

[chalkie]

Cheers Eugene

DBVM whats the Q.... ? now i is confuddled.

[darkbluevanman]

James bond...

[chalkie]

James bond...

PMSL very good