This is how I have just done one on a members van (Top section of X-member)
Moderator: Luke
stugg77 wrote:Any more updates for this build?
paul2012 wrote:tony&kasia wrote:A big thank you to paul2012 who has posted some great info with his project including wiring details for the screen & hazzard switches etc Paul2012 is going to do our mk7 front end conversion So we are really happy about that
No problem m8
I will be posting wiring details for column switchgear at some point over the weekend
tony&kasia wrote:Ok some updates as not really had any time to do much due to work & family life. I have took pictures & will post soon. But I have got the dash board in & have everything mk7 fitted. I fitted a c max steering wheel & looks good. I still got a bit of wiring left to do but upon checking what I have done so far the front & rear screen switches work that I got from a c max. The indicators work with the mK7 stalk. The horn works & airbag is connected. The mk7 key reader works as the engine starts. The modified hazard switch works. Just got front & rear wipers to do & the high low beam flashers. So all good.
The ducting was a pain because I had to modify the one behind the glove box again because the glove box would not close.
The only problem at the moment is my speedo is jumping up to 20mph when I start the engine. Could that be down to the battery as I always have to jump start it? It done the same with the old clocks so I know it's not the clocks.
Next job is to get the tailgate fitted & the back straightened out. I did fit the new carpet arches when dash was out. I nearly forgot
Not fitted gear cables yet. Hope to do that the weekend
Return to Customising and one offs
Users browsing this forum: No registered users
This site contains affiliate links for which we may be compensated.