My Minibus to campervan conversion blog.

[brightfish]

I thought some of you guys may be interested in my blog http://abusforus.blogspot.com/

Cheers
Joe

[transerbia]

Really good job! Could you post some details of the sliding door mechanism? (between the cabin and the rear of the camper).
I am renovating the interior of my camper, so it was very interesting.

[brightfish]

It's really very simple, I made the runners out of a couple of pieces of pine, routed a 10mm slot in both runners (the top slot is twice as deep as the bottom one in order to fit the door) the door is going to be made out of 9mm MDF and edged with plastic U channelling. This is exactly how I made the sliding doors under the seating area, it works and looks really good.

[transerbia]

Thank you.

[brightfish]

You're welcome

[Luke]

nice work mate

[brightfish]

Thank you