Transitmania 11 @Santa Pod 17th to 19th May 2019


Tie down point trims

An area for members to hang out and chat, discuss anything transit related!

Moderator: Luke

Tie down point trims

Postby MinorMatt » Fri Jun 07, 2019 10:07 pm

I want to make a good job of the floor in the back of my van... but want eyebolts in the floor for tie downs...

At the moment, they are just through a hole in the ply, and I would like to put some decent flooring in it, so would like some sort of trim (would be good to be able to seal it, so any spillages don't go under the ply...

I can't see anything suitable for sale, any suggestions?
95 M Ford Prototype/Mule DRW 100PS Highcube
96 N 120 Turbo'd DI SWB Low
96 P 150 TD (100PS EPIC) LWB Hi-Top

Lucas laser 2000 & IDS onwner

Gaffa tape is like the force - it has a light side, a dark side, and it holds the universe together.
User avatar
MinorMatt
Transit Extremist
Transit Extremist
 
Posts: 21108
Joined: Mon Sep 17, 2007 7:53 pm
Location: Shropshire or Sussex

Re: Tie down point trims

Postby Punto443 » Fri Jun 07, 2019 10:14 pm

They were available from ford for the mk6/7 floor tie down points, £10 each I believe?
You do not have the required permissions to view the files attached to this post.
Your bullets cannot harm me, my wings are like a shield of steel

2018 Renault trafic
my old mk7
my old mk6
my xr3i
2019 Jeep Compass
2003 jimny
User avatar
Punto443
Site Moderator
 
Posts: 14753
Joined: Mon Jan 23, 2012 4:53 pm
Location: Deep fried pizza country

Re: Tie down point trims

Postby MinorMatt » Tue Jun 11, 2019 1:36 pm

Thanks Morgan, not quite what im looking for. Something a bit like that but square?
95 M Ford Prototype/Mule DRW 100PS Highcube
96 N 120 Turbo'd DI SWB Low
96 P 150 TD (100PS EPIC) LWB Hi-Top

Lucas laser 2000 & IDS onwner

Gaffa tape is like the force - it has a light side, a dark side, and it holds the universe together.
User avatar
MinorMatt
Transit Extremist
Transit Extremist
 
Posts: 21108
Joined: Mon Sep 17, 2007 7:53 pm
Location: Shropshire or Sussex

Re: Tie down point trims

Postby dirtydog » Sun Jul 07, 2019 10:29 am

What about getting something 3D printed of your own design/specs?
2006 Mk7 115 350
User avatar
dirtydog
Transit Extremist
Transit Extremist
 
Posts: 5053
Joined: Wed Feb 17, 2010 5:56 pm
Location: Aldershot. Hampshire

Re: Tie down point trims

Postby MinorMatt » Mon Jul 08, 2019 3:57 pm

I have a cunning plan... but there are more important things to do first
95 M Ford Prototype/Mule DRW 100PS Highcube
96 N 120 Turbo'd DI SWB Low
96 P 150 TD (100PS EPIC) LWB Hi-Top

Lucas laser 2000 & IDS onwner

Gaffa tape is like the force - it has a light side, a dark side, and it holds the universe together.
User avatar
MinorMatt
Transit Extremist
Transit Extremist
 
Posts: 21108
Joined: Mon Sep 17, 2007 7:53 pm
Location: Shropshire or Sussex

Re: Tie down point trims

Postby ned » Mon Jul 08, 2019 4:07 pm

Is it as cunning as a fox what used to be professor of cunning?

Or

As cunning as a fox who’s just been appointed Professor of Cunning at Oxford University?
03 transit 125t280 2.0 tdci swb executive college blue 92 crewcab. Built in Belgium so deserves lots of love. 219,000 miles on the clock.

Instructions for use. fill with fuel. start engine. drive like a t#@t.
User avatar
ned
Transit Extremist
Transit Extremist
 
Posts: 13899
Joined: Sat Jan 16, 2016 9:01 am
Location: Somewhere in time


Return to Transit Talk



Who is online

Users browsing this forum: No registered users