Twin exhaust

[Andrew-v4]

Just wondering if there are anyone who has put a twin exhausts out the back of there van
Fancy doing this but need a couple of pictures to get an idea.

[Neil]

ive got one down either side

[Gunslinger]

i will have 2 outlets on the drivers side of my van just infront of the rear wheels when i build my exhaust, but thats only because the chrome oval end sections i have are too small to use on their own so i will use both of them together

[jay]

yeah i thought of this before..twin pipes looks nice...even on a stock van.

[Gunslinger]

well the idea was to keep as much stock as possible,although i am gonna change a couple of things

1) wont be as close to the prop (i'll add a section to the cross pipe)
2) the round box in the standard config will be a stainless one, but other than that the middle section with the boxes will be standard dimensions and front fitting just cut shorter at the rear, so easy to replace
3) my home built section at the end (90 degree bend and one into 2 splitter will slide onto the end of original shortened middle/box section for easy replacement)
4) no fooking way is it going over the rear axle and all that crap again

[jay]

yeah .just get rid of the rear bit over the axle...just have the stock exhaust silencer bit.but fit your own side exit bit...i like that idea.you got me thinking now.........side exit on mine.....saves having a exhaust ring on the garage door from the rear exhaust...

[madmark]

personaly i dont think a transit look write if it hasnt got the exhaust out the back, allthuogh i will probly have to have a side exit on the mk1 !

[jay]

least with a side exit you can see how much black.white .blue smoke you have coming out.. (choose which colour you have..)

[Gunslinger]

LOL, the only downside, is that you lose the space for a second fuel tank, i actually considered redisigning mine and kicing it out early to leave the space for that

[madmark]

i am still running the standard v4 system on the mk1 but the downpipes have been moded and and i think its not letting enouph gases thruogh, so might have to have a system made , or oneday find the original v6 transit down pipes!

[Neil]

i am still running the standard v4 system on the mk1 but the downpipes have been moded and and i think its not letting enouph gases thruogh, so might have to have a system made , or oneday find the original v6 transit down pipes!

v4 system will restrict the flow mark i am also considering removal of sidepipes for a out back system but i have to say that the sills are perfect maybe because they are always hot when runnin also i may have a steel pair of downpipes

[Valsheda]

HIYA ANDREW , I HAVE A TWIN TRIM ON THE BACK OF MY POWERFLOW SYSTEM , THE JOIN OF THE TRIM SITS FAR ENOUGH BACK TO GIVE THE IMPRESSION OF TWIN PIPES

[Gunslinger]

thats something like what i will be aiming for, only on the side and angled downward slightly, maybe not sticking out that far either, keep it kind of subtle

[Andrew-v4]

sorry guys i ment one each side
Yours looks nice mark but want it to look standard

[Luke]

what like this