Transitmania 11 @Santa Pod 17th to 19th May 2019


slave cylinder

Members can put pictures of their Transit on here!

slave cylinder

Postby migw45 » Sun May 21, 2017 8:38 pm

hi every one ime new to his so hope some one may have the answers I have a 2005 2.0 tdci transit tourneo when ime waiting at trafick lights etc with the clutch in and van in gear after a wile the van will start to move on its own ive been told it could be the master cylinder or slave cylinder ive found a mastercylinder but cant find a slave cylinder for a mk6 2.0 front wheel drive tdci does it have a slave cylinder and what do they do hope some one can help thanks migw45
migw45
Newbie
 
Posts: 2
Joined: Sat May 20, 2017 10:06 pm

Re: slave cylinder

Postby loot » Mon May 22, 2017 10:24 am

It'll be inside the gearbox and it's called a concentric slave cylinder, it's part of the clutch kit but requires removal of the gearbox.

I'd bleed the clutch first, then possibly replace the master cylinder and if it is still a problem then you'll be looking at the box out.

You may be able to test the master if you block the pipe that goes to the slave, not done it on these so might need to confirm that.
:-)
65 290 2.2 125ps custom with 2 side doors 8)
07 350 170ps
Image
Ids v86 licence + v86.04 update + xprog here
Ids map here
User avatar
loot
Site Moderator
 
Posts: 26245
Joined: Sat May 05, 2012 6:06 pm
Location: North Wales

Re: slave cylinder

Postby migw45 » Sun Jun 04, 2017 7:24 am

thanks it was the master cylinder changed that and every things great now thanks for the help
migw45
Newbie
 
Posts: 2
Joined: Sat May 20, 2017 10:06 pm


Return to Members Transits Gallery!



Who is online

Users browsing this forum: No registered users