*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


rubber injector seals blow by

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

rubber injector seals blow by

Postby bazaducato » Sun Apr 14, 2024 9:07 am

Hi.
I have a ducato 2.2 puma engine. i have had some sooty black appearing around No2 injector for a while, on top of the rocker cover seal. now noticing the same appearing on No1 and No3. taking off the filler cap appears wuite normal, minimal smoke and no excessive noise, so dont think its the copper rings. could the breather system be faulty or blocked? as heard this can over pressurize the rocker. also small iol leak somewhere on the front of the engine that is making the alternator wet with oil and down below that. dont think its the rocker cover gasket although dont know unless i tale the front off the vehicle for a good look

ANY help really appreciated
bazaducato
Newbie
 
Posts: 5
Joined: Sun Apr 14, 2024 8:44 am

Return to Technical Problems & Questions



Who is online

Users browsing this forum: Baidu [Spider]

This site contains affiliate links for which we may be compensated.