*NOW BOOKED FOR 2025* Transitmania 16 @ Santa Pod 11th to 13th July 2025 *ALL DETAILS HERE*


How screwed am I?

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

How screwed am I?

Postby Hanamalu » Sat Mar 22, 2025 12:56 am

1000006706.jpg
Hi there folks!

I have a 2017 Transit 350HD. While trying to replace the fuel injectors, the mechanic discovered a lot of rust on the engine (Water had been pouring on it from the windshield). The nuts for the intake manifold had to be ground down. After removing this part he told me he doesn't feel comfortable replacing the injectors because they could break, or fall in the cylinders and now he will have to open the engine and all those nuts are as bad as the one on the intake. He says that this could easily cost +$10,000. How bad is the risk that this will happen? Should I take it to a dealer where they have more experience with this engine?
You do not have the required permissions to view the files attached to this post.
Hanamalu
Newbie
 
Posts: 1
Joined: Sat Mar 22, 2025 12:45 am

Re: How screwed am I?

Postby metalworker0 » Sat Mar 22, 2025 1:30 pm

we don't know ... not many members here with a V8 or V6 is it ? , you don't say petrol or diesel ..so not much to go on to answer your questions.

All the best.mark
User avatar
metalworker0
Transit Fanatic
Transit Fanatic
 
Posts: 3682
Joined: Wed May 05, 2021 4:43 pm
Location: Prestatyn


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.