leaf springs mk6 mk7

[jasonblacktransit]

hello people. done a mk7 axle on my mk6 t350 lwb high top some time ago. all good but now need to change my leaf springs as one is a bit tired and having a lean . i do want to lower the back if possible to make loading my drag bike a bit easier. i can only see that people provide mk7 lowering springs at a 4 inch drop that i want. will i be able to fit the mk7 springs . are the lengths and mounting bolts compatible. if not does anyone provide mk6 lowering leaf springs for the t350...please help if you can

[dumper]

When I was looking for mk6 rear springs I measured the works mk 7 and the springs were wider

[andz327]

When I was looking for mk6 rear springs I measured the works mk 7 and the springs were wider

I thought that it would be the same with only fwd up to T300 springs being narrower at the u bolts

Sent from my SM-G990B using Tapatalk

[jasonblacktransit]

my promlem is i dont want to buy new mk7 springs and they dont fit. i just need to know if the mounting eye bolts are same diamater and the mounts on the chassis are in the same place

[dumper]

When I was looking for mk6 rear springs I measured the works mk 7 and the springs were wider

I thought that it would be the same with only fwd up to T300 springs being narrower at the u bolts

Sent from my SM-G990B using Tapatalk

Hi anddz this was in rwd 350 s mk 6 L4 and mk7 L 3 from memory same width full length and the spring eyes were formed differently