dust cover on prop axle

[vizymoteau]

I got a problem with my Mk3 FT190 (86), especially with the prop bearing shaft .
I take off the second part of the prop axle easilly , but I don't know how to pull of this bloody kind of metal dust cover over the grooved part avoiding me to take out the bearing. I can't find any informations in the technical book.
At this time , every parts return back on place and I prefer to wait the "how to do" before breakin' my hammer !!!

[vizymoteau]

Here's the f......part !
http://viewmorepics.myspace.com/index.cfm?fuseaction=user.editAlbumPhoto&albumID=974319&imageID=11662065

[MrMPuk]

Can't see it.

[Luke]

cant see it either but i think the bit you mean you have to split the prop 1st to get to the bearing

have you got the prop in 2 parts

[vizymoteau]

I'm a stupid boy ! You can't see the pic without a login ...
But , yes , I split the axle but I can't take off the bearing shaft due to this cover on the groove end .I gonna try to find a way for a pic .
Sorry for my English language , I kown it could made you laught !

[vizymoteau]

Let's try again .....Need to scroll a bit to see the pic .Part with the red arrow .
http://www.taunus.fr/forum/viewtopic.php?f=10&t=3326

[vizymoteau]

Damned ! Another dead link !!

[vizymoteau]

OK , anyway ..
Does anybody had to replace prop bearing on a Mk3 FT190 ?
A link for a "how to made" could also be useful..
.At this time , it was problem free with both FT80 and 100 I had but I can't find a way with 190 .

[vizymoteau]

...It came hardly with a big puller . Prop diameter is around 1.8/16 and the propshaft bearing seems to be hard to find , looking at the first research I done.