cossy 24v fuel pressure

[bikemad]

hi, does anyone no how you turn up the fuel pressure on the injection rail on a cossy 24v engine.

thanks

[Luke]

i didnt think you could it's controlled by the regulator at the end of the rail - i'd planned on swapping it for a rising rate on when i fit the turbos

[bikemad]

ya been looking on some forums, fordpower the best one loads on 24v plus other ford engines on there including turbo conversions. loads have fitted bob cams and vectra injecters plus they turn up the fuel pressure. just doesnt say how,think they must use an adjustable pressure valve using about 3.5 bar. getting good power gains you have to become a member to access everything but well worth it for anyone wanting to put any ford engine in there vans gives you all the things you want to no with tuning etc

[Luke]

i'm on fordpower- was very usefull when i was doing the conversion

tony has bob cams and vectra injectors - but didnt beat mine at north weald 2008 mabe thats why he needed to up the fuel pressure

[bikemad]

did he use the bob timing washers. cuz they are saying you need to use them or the timing will be out perhaps that why it was not that fast. they say your looking at about 220 to 230bhp.

[Luke]

yeah he did cant find a vid of his vs mine but this was it on its own http://www.youtube.com/user/alannightin ... NtA00hAvHc

was only a 1/10th or summat behind mine

[bikemad]

just looked at that really good that. some of you on there mate, one of them you got your arse kicked by a white van and guess what my van is white to. he he seriously though doing mine now so should be done tomorrow,will let you no how she goes. wheather pemitting

[Luke]

which white van the mk6 cos it's me cousins van- i need to get me finger out with that back axle and 330bhp ecu and bring it this year - that'll be the one to beat the nitrovans time

[bikemad]

yes it was mate. sod his diff mate. beef up ya bottom end slap the whistles on then your the man to beat. there is a 24v engine all done ready for the turbos £3600 on ebay now. wish i could afford it

[Luke]

seen it too much for me

i was thinking of having one of the girdle's made up to give the main bearings some ridgidity - if got 2 CNC machined up would you be interested in one aswell