stuck in first gear... Stranded!!

[jay]

ford mt75 box dont fit on a pug engine didnt someone over on the ldv forum try it(I joined when i had a ldv400 and a convoy)they found it didnt fit on the engine at all unless you made a adaptor plate up but the gearstick was further back..check a convoy and ldv400 and you will see the stick is firther back towards the cab by about 6 inches..

[bazw]

Are you sure Baz

Reverse is by pulling up lever on the gear stick shaft and then down to bottomright below 5th.

hang on a mo , we talking about the box i was looking at or the problem one jas has here ?

[tim]

The pug engined Convoy had a MT75 box,i know that for sure

[Altransit]

The pug engined Convoy had a MT75 box,i know that for sure

Oooooh .............. new information

Thanks Tim

[tim]

The mt75 box was fitted to LDV Convoys from sep 1996 to Pug EN/ET and Ford Di engines,I have just got this info from my servive disc

[AndyG]

But we're talking 1994 here

[tim]

Are you sure its a Ford Engine,Which side is the injector pump on,Pass or drivers

[Altransit]

It's defo a pug engine, the question was about the box being an MT75, or not

[tim]

Sorry about that.On about 3 forums at the moment.Give me 5 minutes

[tim]

Right i have it right this time.All 400 models with the En/Et Pug engines had the P5_100 box.After 96 the En/Et pug engines had the MT75 and single rail box.If your box has gear linkages its the p5-100.Come to think of it i had a Citroen relay van many years ago and had problems with gear linkage,if one of the little ball joints came loose it would stay in that gear no matter what you done.I have disc here with everything about the box but havent a clue how to download it.If you have any idea how you do it your welcome to it other than that its the snail mail

[bazw]

tim if you download this prog

http://www.utorrent.com/downloads


( top one)

then install and follow instructions for "making a torrent " you can post it to a torrent share site and we can get it

on a scale of 1-10 its around a 3 or 4 i would say as comp progs go

also not a bad way to pick up other files and stuff

[tim]

tim if you download this prog

http://www.utorrent.com/downloads


( top one)

then install and follow instructions for "making a torrent " you can post it to a torrent share site and we can get it

on a scale of 1-10 its around a 3 or 4 i would say as comp progs go

also not a bad way to pick up other files and stuff

PM sent