*NOW BOOKED FOR 2026* Transitmania 17 @ Santa Pod 17th to 19th July 2026 *ALL DETAILS HERE*


please help!!!!!!!!!1

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

please help!!!!!!!!!1

Postby blade » Wed Sep 08, 2010 10:25 pm

Hi all.
i have a 125-350 luton 53 reg tranny. i have taken a complete engine from another van inc the ecus key code reader barrel throttle pedal and fitted it into mine and it starts and runs for about 5-6 seconds you can rev it in that time and then just dies??? does the same everytime but when it dies the heater plug light flashes??? can anyone help ive bled the injectors i even left the loom on the new engine and all i had to do was connect the big plug and connect the starter cable and the 3 wires on the box. i am lost now.
PLEASE HELP.
stu :(
blade
Newbie
 
Posts: 7
Joined: Tue Nov 25, 2008 5:31 pm

Re: please help!!!!!!!!!1

Postby MrMPuk » Wed Sep 08, 2010 10:31 pm

Got to be worth having the codes read to see what the fault is.
MrMPuk
Transit Extremist
Transit Extremist
 
Posts: 27856
Joined: Sat Mar 26, 2005 7:50 am

Re: please help!!!!!!!!!1

Postby blade » Wed Sep 08, 2010 10:34 pm

its in spain and i dont trust them here!!!!!!
i will ship it back to uk and have to put in into ford just thought someone may have come across it before???
cheers
blade
Newbie
 
Posts: 7
Joined: Tue Nov 25, 2008 5:31 pm

Re: please help!!!!!!!!!1

Postby MrMPuk » Wed Sep 08, 2010 10:43 pm

Could really be anything, especially as you've had everything out.
MrMPuk
Transit Extremist
Transit Extremist
 
Posts: 27856
Joined: Sat Mar 26, 2005 7:50 am


Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.