*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*


Durashift semi auto to manual ecu conversion problem

Use this forum to post technical questions & problems about any Transit

Moderator: Luke

Re: Durashift semi auto to manual ecu conversion problem

Postby adi001 » Tue Dec 17, 2013 9:58 pm

Hello

I also have similar problem, just I need ECU for Ford Transit automatic Van (FA__) 2.4 TDE (125HP) 07-2001
Original ECU is 3C11-12A650-AC I got similar ECU but I think not from automatic and with this ECU I can start engine , but cant remote Drive Reverse on the panel, when I press D engine stoped
Can anybody program this Donor ECU with program for automatic transmission?

Kind Regards

Andrews

email adi001@eircom.net
adi001
Newbie
 
Posts: 1
Joined: Tue Dec 17, 2013 9:46 pm

Re: Durashift semi auto to manual ecu conversion problem

Postby smiley32 » Wed Aug 31, 2016 6:14 pm

hy i need help with the calibration number for the PCM 125 hp 2.4TDDI engine please.. i convert from durashift semi auto to manual transmision the ortiginal ecu number is 3C11-12A650-AG
smiley32
Newbie
 
Posts: 1
Joined: Tue Aug 30, 2016 4:39 pm

Re: Durashift semi auto to manual ecu conversion problem

Postby ossie cossie » Sun Sep 25, 2016 12:43 pm

cant help im afraid but just watching the thread to see what happens as i have an asm as well. :)
ossie cossie
Transit Devotee
Transit Devotee
 
Posts: 582
Joined: Sat Sep 26, 2009 2:49 pm

Re: Durashift semi auto to manual ecu conversion problem

Postby max.mustermann12 » Thu Jan 12, 2023 3:39 pm

Hello, could somebody tell me the calibration number for my ECU?

I have a Ford Transit from february 2005 with 2.4l Duratorq 92KW engine. RWD LHD and Diesel.

My ASM valve block got faulty and now I built in a gear shift lever and a clutch. But The motor wont start because of the removed parts. The motor just runs in idle if I activate the starter manually.
max.mustermann12
Newbie
 
Posts: 2
Joined: Thu Nov 03, 2022 10:32 am

Re: Durashift semi auto to manual ecu conversion problem

Postby max.mustermann12 » Wed Jan 18, 2023 4:36 pm

Hello,
I have also a Ford Transit with broken ASM and converted it to manual shift. (installed clutch and gear shift lever).

Now the enigne wont start because the asm module is disconnected.

I have read, that is just need to get the calibration number of the same Model but manual shifting and flash the image of this calibration number to the ECU.

Can anybody help me please to get this number?

best regards
max.mustermann12
Newbie
 
Posts: 2
Joined: Thu Nov 03, 2022 10:32 am

Re: Durashift semi auto to manual ecu conversion problem

Postby bracecrop » Sat Feb 11, 2023 7:36 am

I have the calibration number for the module I have which is a '52 plate 90ps rwd so that would do it,
Sounds like the dealer he's taken it to arent willing (don't know how) to re-flash his module.
bracecrop
Newbie
 
Posts: 2
Joined: Sat Feb 11, 2023 7:22 am

Re: Durashift semi auto to manual ecu conversion problem

Postby bracecrop » Tue Feb 21, 2023 5:30 pm

i convert from durashift semi auto to manual transmision the ortiginal ecu number is 3C11-12A650-AG
bracecrop
Newbie
 
Posts: 2
Joined: Sat Feb 11, 2023 7:22 am

Re: Durashift semi auto to manual ecu conversion problem

Postby russellii » Wed May 10, 2023 5:05 am

Hi All

is there any step by step guides in converting to manual.

Does it require fully removing the engine gearbox from the van?
Regards Russell
Wine bottles should be larger because then there would be some to share.
russellii
Transit Fan
Transit Fan
 
Posts: 16
Joined: Wed Nov 30, 2022 5:02 am

Previous

Return to Technical Problems & Questions



Who is online

Users browsing this forum: No registered users

This site contains affiliate links for which we may be compensated.