*NOW BOOKED FOR 2024* Transitmania 15 @ Santa Pod 19th to 21st July 2024 *ALL DETAILS HERE*
Mk8 Heater fan only works on speed 4
Moderator: Luke
3 posts
• Page 1 of 1
Mk8 Heater fan only works on speed 4
by Robbieben » Fri Oct 15, 2021 7:38 am
Hi, I've just bought a 2016/66 plate Transit custom 2.0 Ecoblue, the heater gets warm but the fan control does nothing on 1,2,3 but the fan then works on speed 4, has anyone had a similar issue?
- Robbieben
- Transit Fan
- Posts: 18
- Joined: Mon Oct 11, 2021 7:58 pm
Re: Mk8 Heater fan only works on speed 4
by Derv » Mon Oct 25, 2021 7:50 am
Yes it will be the heater resistor it's located near the Blower motor, cheap fix but a bit of a faff to change
Sent from my M2101K6G using Tapatalk
Sent from my M2101K6G using Tapatalk
-
Derv - Transit Addict
- Posts: 23
- Joined: Thu Sep 13, 2018 10:32 am
Re: Mk8 Heater fan only works on speed 4
by Robbieben » Sun Jan 02, 2022 4:15 pm
Derv wrote:Yes it will be the heater resistor it's located near the Blower motor, cheap fix but a bit of a faff to change
Sent from my M2101K6G using Tapatalk
Thanks for the advice, replaced the resistor unit and now it works as it should.
- Robbieben
- Transit Fan
- Posts: 18
- Joined: Mon Oct 11, 2021 7:58 pm
3 posts
• Page 1 of 1
Return to Technical Problems & Questions
Who is online
Users browsing this forum: No registered users