Hi, thanks for the add to the forum. I have a 2003 Mk6 Transit that has been converted to a campervan. It has central locking but it is not manual and the key / lock is a bit dodgy. Anyhow, I bought one of those "after market" remote central locking fobs / units from eBay and started fitting it. Took the door liner off to find the wires, expecting probably two or three wires but there are like 7 or so. On the new CL unit there are six wires, orange, white, yellow, orange/black, white/black and yellow/black. I did put the orange, white and yellow into the connector in the door harness and the doors locked but kept on cycling trying to lock again about 3 times. This was without pressing the fob.
Can anybody shed any light as to which wires I need to connect from the new CL unit to the wires in the door harness as I have trawled the internet and cannot find a door circuit diagram to help. I thought, naively, that there would only be two or three that make the circuit when the key is turned either one way or the other.
Any help would be massively appreciated.